

Polly power v0.0.1
- Size
- 134.7 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 44
- Pads
- 196
- Tracks, vias
- 350, 28
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Aug 2021
- Updated
- 16 Feb 2022
Overview
Polly power v0.0.1 is an open-source printed circuit board by icnagy, from the icnagy/polly-power repository on GitHub. It is a 2-layer board of 134.7 × 53.3 mm with 53 parts on 44 nets, routed with 350 tracks and 28 vias.
It is built around the TL072, 74HC4051 and 74LS04PC, with the BC547C among its other parts. Its parts include 21 resistors, 11 capacitors, 11 connectors, 8 ICs and 2 transistors.
Main components
4TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInvertersBC547C
TO-92-55℃~+150℃ 1 NPN 100mA 100nA 150MHz 300mV 45V 610 625mW 6V NPN TO-92 Bipolar (BJT) ROHSLGEBipolar (BJT)
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R12, R14, R15 |
| 6 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C5, C7, C8 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9, R11, R19 |
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C6, C9 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C10, C11 |
| 2 | BC547C | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | 0.33uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 119 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 150k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21 |
| 1 | 22 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20 |
| 1 | 4k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 500 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 74HC4051 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U3 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | 909 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Arduino | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P9 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | LM337_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | LM4040LP-4.1 | Package_TO_SOT_THT:TO-92_Inline_Wide | U8 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MCP1541-TO | Package_TO_SOT_THT:TO-92_Inline_Wide | U7 |
| 1 | MCP4922-EP | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U6 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
Similar boards
- 2 layers162.8 × 100 mm

- 4 layers120 × 108 mm

- 4 layers154.9 × 128.4 mm

Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9 - 2 layers80.8 × 99.9 mm

Circuit board
ltrooney/diy-synth
A repository containing a handful of utilities for my DIY Eurorack-based modular synthesizer. Snippets include a virtual wavetable oscillator, a step sequencer, and more.
71 parts7 - 2 layers60.5 × 110 mm

- 4 layers154.9 × 128.4 mm

- 2 layers61 × 69.9 mm

- 4 layers171.5 × 171.6 mm

Questions
How big is the Polly power v0.0.1 PCB?
It measures 134.7 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Polly power v0.0.1 use?
53 parts, built around the TL072, 74HC4051, 74LS04PC and BC547C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Polly power v0.0.1 KiCad files?
From the icnagy/polly-power repository on GitHub, at the commit this page was made from: the board is polly-power_v0.0.1.kicad_pcb and its schematic dac_and_output.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Polly power v0.0.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask icnagy before reusing the design.