
Leverless controller 3board
IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games

A Leverless Controller for Fighting Games
3board b is an open-source printed circuit board by IceyMu, from the IceyMu/Leverless-Controller repository on GitHub. It is a 2-layer board of 92.5 × 89.5 mm with 29 parts on 12 nets, routed with 84 tracks and 8 vias.
A Leverless Controller for Fighting Games
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SolderJumper_2_Bridged | Fightstick_Library:EdgeSolderJumper-2_Right_Half | JP15, JP17, JP18, JP19, JP20, JP21, JP22, JP23, JP24, JP25, JP26, JP27 |
| 7 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX | SW2_LK, SW3_MK, SW4_LP, SW5_MP, SW6_DI, SW7_HP, SW9_HK |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H8, H9, H10, H11, H12 |
| 4 | SW_Push | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB | SW10_SHARE, SW11_START, SW14_PS, SW15_TOUCHPAD |
| 1 | Board | PCM_kikit:Board | B2 |

IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games

IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games




gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 92.5 × 89.5 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IceyMu/Leverless-Controller repository on GitHub, at the commit this page was made from: the board is Rev1/KiCAD/3_board - REV B/3board_b.kicad_pcb and its schematic Rev1/KiCAD/3_board - REV B/Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IceyMu before reusing the design.