4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers67.4 × 40.6 mm
WBO2-02-1.1
icelord75/WBO26Wideband O2 LSU 4.2 Sensor Controller
- Size
- 67.4 × 40.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 45
- Pads
- 153
- Tracks, vias
- 567, 58
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Sep 2017
- Updated
- 19 Sep 2017
Overview
WBO2-02-1.1 is an open-source printed circuit board by icelord75, from the icelord75/WBO2 repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 67.4 × 40.6 mm with 53 parts on 45 nets, routed with 567 tracks and 58 vias.
It is built around the LM324. Its parts include 27 resistors, 10 capacitors, 4 connectors, 3 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdWBO2
Wideband LSU 4.2 controler
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | SM0805 | R4, R7, R8, R18, R19, R20, R21, R22, R23, R29 |
| 5 | 5k | SM0805 | R24, R25, R26, R27, R28 |
| 3 | 1uf | SM0805 | C2, C7, C15 |
| 3 | CONN_2 | mors_2p | P2, P6, P7 |
| 2 | .1 | SM0805 | C5, C6 |
| 2 | 1.8k | SM0805 | R2, R9 |
| 2 | 100k | SM0805 | R17, R30 |
| 2 | 10uf | SM1206 | C1, C13 |
| 2 | 12k | SM0805 | R15, R16 |
| 2 | 22k | SM0805 | R13, R14 |
| 2 | CONN_3 | mors_3p | K1, K2 |
| 2 | LED | LED-3MM | D1, D2 |
| 1 | .1uf | SM0805 | C14 |
| 1 | 100 | SM0805 | R1 |
| 1 | 10mh | SM1206 | L1 |
| 1 | 18k | SM0805 | R3 |
| 1 | 229 | SM0805 | C4 |
| 1 | 22p | SM0805 | C3 |
| 1 | 6.8k | SM0805 | R10 |
| 1 | 62ohm | SM0805 | R12 |
| 1 | 7805 | TO220_VERT-reg | U2 |
| 1 | 8mhz | HC-18UV-short | X1 |
| 1 | ATMEGA8-P | DIP-28__300_ELL | IC1 |
| 1 | CONN_4 | PIN_ARRAY_4x1 | P1 |
| 1 | DIODE-SOT | SOT23 | D3 |
| 1 | FUSE | FUSE5-20 | F1 |
| 1 | LM324 | SO14N | U4 |
| 1 | MOS_N | TO220GDS | Q1 |
Questions
How big is the WBO2-02-1.1 PCB?
It measures 67.4 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WBO2-02-1.1 use?
53 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WBO2-02-1.1 KiCad files?
From the icelord75/WBO2 repository on GitHub, at the commit this page was made from: the board is schematics/WBO2-02-1.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WBO2-02-1.1 design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers36.8 × 34.7 mm
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm
- 2 layers231.1 × 106.7 mm
- 4 layers82.6 × 82.6 mm
- 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers292.1 × 88.3 mm
Snark barker mca
schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
177 parts69