2 layers99.6 × 69.8 mm
2 layers80 × 64.5 mm
TermoCloud
icapa/termocloud_pcbTermocloud pcb kicad version
- Size
- 80 × 64.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 60
- Pads
- 121
- Tracks, vias
- 127, 1
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Mar 2018
- Updated
- 7 Jan 2019
Overview
TermoCloud is an open-source printed circuit board by icapa, from the icapa/termocloud_pcb repository on GitHub. It is a 2-layer board of 80 × 64.5 mm with 28 parts on 60 nets, routed with 127 tracks and 1 via.
It is built around the HLK-PM01, DHT11 and BC817. Its parts include 7 resistors, 7 connectors, 6 ICs, 3 capacitors and 2 diodes.
Main components
3
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdtermocloud_pcb
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2K2 | Resistors_SMD:R_0603 | R4, R5, R6 |
| 3 | 4N25 | Housings_DIP:DIP-6_W7.62mm | U2, U3, U4 |
| 3 | Screw_Terminal_01x01 | Connectors:1pin | J5, J6, J7 |
| 2 | 160 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 1N4148 | Diodes_SMD:D_SMB | D1, D2 |
| 2 | BC817 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 2 | Screw_Terminal_01x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | J1, J4 |
| 1 | 100nF | Capacitors_SMD:C_0603 | C3 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C1 |
| 1 | 10K | Resistors_SMD:R_0603 | R7 |
| 1 | 480 | Resistors_SMD:R_0603 | R3 |
| 1 | CP | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C2 |
| 1 | DHT11 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4pol | U5 |
| 1 | Fuse | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1 |
| 1 | HLK-PM01 | TermoCloud:HLK-PM01 | U6 |
| 1 | RELE_THT_BI_5V | Relays_THT:RELE_THT_2Coin | U1 |
| 1 | Raspberry_Pi_2_3 | TermoCloud:RPi_Zero | J2 |
| 1 | Screw_Terminal_01x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J3 |
Similar boards
- 2 layers130 × 80 mm
- 2 layers121 × 54 mm
- 2 layers98 × 50 mm
- 2 layers122.5 × 88 mm
- 2 layers99 × 90.1 mm
Shield STM32 Bluepill
Rdisrael/KiCad-Projeto-Ensino-
Repository of projects carried out during the teaching project. contains: booklets, five projecs and KiCad files
70 parts2 - 2 layers99 × 90.1 mm
Shield STM32 Bluepill
Rdisrael/Projeto-Bluepill
Projeto de uma placa educacional usando o modulo Bluepill. Realizado em parceira com o professor Rogério Dantas.
76 parts - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108
Questions
How big is the TermoCloud PCB?
It measures 80 × 64.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TermoCloud use?
28 parts, built around the HLK-PM01, DHT11 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TermoCloud KiCad files?
From the icapa/termocloud_pcb repository on GitHub, at the commit this page was made from: the board is PCB/TermoCloud.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TermoCloud design in my own project?
Its repository states no licence, so its author keeps all rights: ask icapa before reusing the design.