Skip to the content
2 layers116 × 112 mmSquiggle no diode, the printed circuit board in 3D

Squiggle no diode

ibnuda/Squiggle47

It's a keyboard family which based on my circumstances, preferences, and observed usages.

Size
116 × 112 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
21
Pads
164
Tracks, vias
278, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Jun 2020
Updated
4 Dec 2020

Overview

Squiggle no diode is an open-source printed circuit board by ibnuda, from the ibnuda/Squiggle repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 116 × 112 mm with 20 parts on 21 nets, routed with 278 tracks and 0 vias.

Its parts include 17 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Squiggle Keyboard

It's a keyboard family which based on my circumstances, preferences, and observed usages.

Requirements:

  • 5 columns per hand. My right pinky is almost useless.
  • At most 3 keys for each side's thumb row. My right thumb key is almost useless.
  • No numrow. It's harder and more cumbersome to use than a numpad on a layer.
  • Split. Typing on single flat keyboard hurts my arms in a lot of use cases.
  • Symmetric. Personal preferences.

This family keyboard repo will not have any of the following features:

  • OLED Screen: useless.
  • LEDs: useless for me and hurt my eyes.
  • Rotary Encoder: useless for me.
  • Hotswap: I need a commitment.
  • Case for Low Profile: defeating the whole purpose of LOW profile.

Screenshot

Standard

  • MX and Alps style switches.
  • 34 Keys.
  • 4x2u thumb keys.
  • 2 Promicros.
  • TRRS/TRS cable.

standard version

Low Profile

  • Dongguan Kaihua Electronics Co., Ltd (originally named Longhua Electronics)'s Choc style switches.
  • 34 Keys.
  • 4x2u thumb keys.
  • 2 Promicros.
  • TRRS/TRS cable.

low profile

36 Keys

  • MX and Alps style switches.
  • 36 Keys.
  • 4x2u+2x1.25u thumb keys.
  • 2 Promicros.
  • TRRS/TRS cable.

36 keys

Minimalist

  • MX and Alps style switches.
  • 34 Keys.
  • 4x2u thumb keys.
  • 1 Promicros.
  • "Amphenol 10 wire" cable.

minimalist

Goldberg

(Because it's more complex than necessary. It's just a damn keyboard.)

  • MX and Alps style switches.
  • 34 - 38 Keys.
  • 4x2u or 8x1u thumb keys. (or anything in between)
  • 2 Promicros.
  • TRRS/TRS cable.

goldberg

Confirmed Working PCBs

Standard

standard

Example firmware: QMK's master branch

Goldberg

goldberg

Example firmware: QMK's master branch

Low Profile

choc

Example firmware: QMK's master branch

Minimalist

minimalist

Example firmware: Ibnuda's fork

Disclaimer

I haven't printed some of it. But, theoretically, they should just work. Oh, if things go wrong, I won't take any responisibilities.

Additional Note

Any files with mokou_*.kicad_mod in libs/footprints are made by Jokan Hiyou and belong to hers. I just dither them and made them kicad footprints.

License

GPLv3.

Parts

20
QtyValueFootprintReferences
15switchfootprints:1u-dualSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW14, SW15, SW16
2switchfootprints:2u-dualSW13, SW17
1ProMicrofootprints:promicroU2
1TRRSfootprints:trrsU1
1switchButton_Switch_THT:SW_PUSH_6mm_H4.3mmswitch99

More from ibnuda/Squiggle

5
  • 2 layers236.1 × 112 mmSquiggle minimalist, the printed circuit board in 3D

    Squiggle minimalist

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    79 parts47GPL-3.0
  • 2 layers116 × 112 mmSquiggle goldberg, the printed circuit board in 3D

    Squiggle goldberg

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    42 parts47GPL-3.0
  • 2 layers116 × 112 mmSquiggle-36, the printed circuit board in 3D

    Squiggle-36

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    38 parts47GPL-3.0
  • 2 layers111.7 × 106 mmSquiggle lopro, the printed circuit board in 3D

    Squiggle lopro

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    36 parts47GPL-3.0
  • 2 layers116 × 112 mmNodiodes, the printed circuit board in 3D

    Nodiodes

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    19 parts47GPL-3.0

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the Squiggle no diode PCB?

It measures 116 × 112 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Squiggle no diode use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Squiggle no diode KiCad files?

From the ibnuda/Squiggle repository on GitHub, at the commit this page was made from: the board is no-diode/squiggle-no-diode.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Squiggle no diode design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).