Skip to the content
2 layers111.7 × 106 mmSquiggle lopro, the printed circuit board in 3D

Squiggle lopro

ibnuda/Squiggle47

It's a keyboard family which based on my circumstances, preferences, and observed usages.

Size
111.7 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
29
Pads
203
Tracks, vias
252, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Jun 2020
Updated
4 Dec 2020

Overview

Squiggle lopro is an open-source printed circuit board by ibnuda, from the ibnuda/Squiggle repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 111.7 × 106 mm with 36 parts on 29 nets, routed with 252 tracks and 0 vias.

Its parts include 17 diodes, 17 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Squiggle Keyboard

It's a keyboard family which based on my circumstances, preferences, and observed usages.

Requirements:

  • 5 columns per hand. My right pinky is almost useless.
  • At most 3 keys for each side's thumb row. My right thumb key is almost useless.
  • No numrow. It's harder and more cumbersome to use than a numpad on a layer.
  • Split. Typing on single flat keyboard hurts my arms in a lot of use cases.
  • Symmetric. Personal preferences.

This family keyboard repo will not have any of the following features:

  • OLED Screen: useless.
  • LEDs: useless for me and hurt my eyes.
  • Rotary Encoder: useless for me.
  • Hotswap: I need a commitment.
  • Case for Low Profile: defeating the whole purpose of LOW profile.

Screenshot

Standard

  • MX and Alps style switches.
  • 34 Keys.
  • 4x2u thumb keys.
  • 2 Promicros.
  • TRRS/TRS cable.

standard version

Low Profile

  • Dongguan Kaihua Electronics Co., Ltd (originally named Longhua Electronics)'s Choc style switches.
  • 34 Keys.
  • 4x2u thumb keys.
  • 2 Promicros.
  • TRRS/TRS cable.

low profile

36 Keys

  • MX and Alps style switches.
  • 36 Keys.
  • 4x2u+2x1.25u thumb keys.
  • 2 Promicros.
  • TRRS/TRS cable.

36 keys

Minimalist

  • MX and Alps style switches.
  • 34 Keys.
  • 4x2u thumb keys.
  • 1 Promicros.
  • "Amphenol 10 wire" cable.

minimalist

Goldberg

(Because it's more complex than necessary. It's just a damn keyboard.)

  • MX and Alps style switches.
  • 34 - 38 Keys.
  • 4x2u or 8x1u thumb keys. (or anything in between)
  • 2 Promicros.
  • TRRS/TRS cable.

goldberg

Confirmed Working PCBs

Standard

standard

Example firmware: QMK's master branch

Goldberg

goldberg

Example firmware: QMK's master branch

Low Profile

choc

Example firmware: QMK's master branch

Minimalist

minimalist

Example firmware: Ibnuda's fork

Disclaimer

I haven't printed some of it. But, theoretically, they should just work. Oh, if things go wrong, I won't take any responisibilities.

Additional Note

Any files with mokou_*.kicad_mod in libs/footprints are made by Jokan Hiyou and belong to hers. I just dither them and made them kicad footprints.

License

GPLv3.

Parts

36
QtyValueFootprintReferences
17Dfootprints:diodeD1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1
15chocfootprints:choc-1SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW14, SW15, SW16
2chocfootprints:choc-2SW13, SW17
1ProMicrofootprints:promicroU2
1TRRSfootprints:trrsU1

More from ibnuda/Squiggle

5
  • 2 layers236.1 × 112 mmSquiggle minimalist, the printed circuit board in 3D

    Squiggle minimalist

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    79 parts47GPL-3.0
  • 2 layers116 × 112 mmSquiggle goldberg, the printed circuit board in 3D

    Squiggle goldberg

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    42 parts47GPL-3.0
  • 2 layers116 × 112 mmSquiggle-36, the printed circuit board in 3D

    Squiggle-36

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    38 parts47GPL-3.0
  • 2 layers116 × 112 mmSquiggle no diode, the printed circuit board in 3D

    Squiggle no diode

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    20 parts47GPL-3.0
  • 2 layers116 × 112 mmNodiodes, the printed circuit board in 3D

    Nodiodes

    ibnuda/Squiggle

    It's a keyboard family which based on my circumstances, preferences, and observed usages.

    19 parts47GPL-3.0

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0
  • 2 layers55 × 70 mmArduino v1, the printed circuit board in 3D

    Arduino v1

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    36 parts915
  • 2 layers50.4 × 24.8 mmLEDboardRev3, the printed circuit board in 3D

    LEDboardRev3

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    36 parts914
  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers32 × 24 mmEsp onelayer3, the printed circuit board in 3D

    Esp onelayer3

    cnlohr/colorchord

    Chromatic Sound to Light Conversion System

    36 parts712
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    36 parts530
  • 2 layers99.1 × 53.3 mmABSIS Mega, the printed circuit board in 3D

    ABSIS Mega

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    36 parts431
  • 2 layers16.1 × 119 mmConnectorL, the printed circuit board in 3D

    ConnectorL

    thpoll83/PolyKybd

    PolyKybd

    36 parts411CERN-OHL-W-2.0

Questions

How big is the Squiggle lopro PCB?

It measures 111.7 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Squiggle lopro use?

36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Squiggle lopro KiCad files?

From the ibnuda/Squiggle repository on GitHub, at the commit this page was made from: the board is lopro/squiggle-lopro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Squiggle lopro design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).