2 layers236.1 × 112 mm
Squiggle minimalist
ibnuda/Squiggle
It's a keyboard family which based on my circumstances, preferences, and observed usages.
79 parts47GPL-3.0
2 layers116 × 112 mm
Nodiodes
ibnuda/Squiggle47It's a keyboard family which based on my circumstances, preferences, and observed usages.
- Size
- 116 × 112 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 20
- Pads
- 160
- Tracks, vias
- 216, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Jun 2020
- Updated
- 4 Dec 2020
Overview
Nodiodes is an open-source printed circuit board by ibnuda, from the ibnuda/Squiggle repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 116 × 112 mm with 19 parts on 20 nets, routed with 216 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdSquiggle Keyboard
It's a keyboard family which based on my circumstances, preferences, and observed usages.
Requirements:
- 5 columns per hand. My right pinky is almost useless.
- At most 3 keys for each side's thumb row. My right thumb key is almost useless.
- No numrow. It's harder and more cumbersome to use than a numpad on a layer.
- Split. Typing on single flat keyboard hurts my arms in a lot of use cases.
- Symmetric. Personal preferences.
This family keyboard repo will not have any of the following features:
- OLED Screen: useless.
- LEDs: useless for me and hurt my eyes.
- Rotary Encoder: useless for me.
- Hotswap: I need a commitment.
- Case for
Low Profile: defeating the whole purpose of LOW profile.
Screenshot
Standard
- MX and Alps style switches.
- 34 Keys.
- 4x2u thumb keys.
- 2 Promicros.
- TRRS/TRS cable.
Low Profile
- Dongguan Kaihua Electronics Co., Ltd (originally named Longhua Electronics)'s Choc style switches.
- 34 Keys.
- 4x2u thumb keys.
- 2 Promicros.
- TRRS/TRS cable.
36 Keys
- MX and Alps style switches.
- 36 Keys.
- 4x2u+2x1.25u thumb keys.
- 2 Promicros.
- TRRS/TRS cable.
Minimalist
- MX and Alps style switches.
- 34 Keys.
- 4x2u thumb keys.
- 1 Promicros.
- "Amphenol 10 wire" cable.
Goldberg
(Because it's more complex than necessary. It's just a damn keyboard.)
- MX and Alps style switches.
- 34 - 38 Keys.
- 4x2u or 8x1u thumb keys. (or anything in between)
- 2 Promicros.
- TRRS/TRS cable.
Confirmed Working PCBs
Standard
Example firmware: QMK's master branch
Goldberg
Example firmware: QMK's master branch
Low Profile
Example firmware: QMK's master branch
Minimalist
Example firmware: Ibnuda's fork
Disclaimer
I haven't printed some of it. But, theoretically, they should just work. Oh, if things go wrong, I won't take any responisibilities.
Additional Note
Any files with mokou_*.kicad_mod in libs/footprints are made by Jokan Hiyou
and belong to hers.
I just dither them and made them kicad footprints.
License
GPLv3.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | switch | nodiodes:1u-dual | switch1, switch2, switch3, switch4, switch5, switch6, switch7, switch8, switch9, switch10, switch11, switch12, switch13, switch14, switch15 |
| 2 | switch | nodiodes:2u-dual | switch16, switch17 |
| 1 | promicro | nodiodes:promicro | U2 |
| 1 | trrs | nodiodes:trrs | U1 |
More from ibnuda/Squiggle
5- 2 layers116 × 112 mm
Squiggle goldberg
ibnuda/Squiggle
It's a keyboard family which based on my circumstances, preferences, and observed usages.
42 parts47GPL-3.0 - 2 layers116 × 112 mm
Squiggle-36
ibnuda/Squiggle
It's a keyboard family which based on my circumstances, preferences, and observed usages.
38 parts47GPL-3.0 - 2 layers111.7 × 106 mm
Squiggle lopro
ibnuda/Squiggle
It's a keyboard family which based on my circumstances, preferences, and observed usages.
36 parts47GPL-3.0 - 2 layers116 × 112 mm
Squiggle no diode
ibnuda/Squiggle
It's a keyboard family which based on my circumstances, preferences, and observed usages.
20 parts47GPL-3.0
Similar boards
- 2 layers43.9 × 27.7 mm
- 2 layers50 × 60 mm
Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm
ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm
- 2 layers25.4 × 25.4 mm
Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm
New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
How big is the Nodiodes PCB?
It measures 116 × 112 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nodiodes use?
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nodiodes KiCad files?
From the ibnuda/Squiggle repository on GitHub, at the commit this page was made from: the board is nodiodes/nodiodes.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nodiodes design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).