2 layers225 × 356.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
103 parts1.3k
2 layers311 × 803 mm
Slepet
ibnuda/Slepet4Slepet!!! bayaran udah abis. ;-;
- Size
- 311 × 803 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 69
- Pads
- 378
- Tracks, vias
- 691, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Jun 2021
- Updated
- 29 Jun 2021
Overview
Slepet is an open-source printed circuit board by ibnuda, from the ibnuda/Slepet repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 311 × 803 mm with 103 parts on 69 nets, routed with 691 tracks and 0 vias.
Its parts include 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
READMESlepet
a shameless clone of omkbd's SectorC.
firmware: https://github.com/ibnuda/qmk_firmware/tree/sixtimesseven/keyboards/slepet
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | diode | footprints:diode | diode1, diode2, diode10, diode11, diode12, diode13, diode14, diode15, diode16, diode17, diode18, diode19, diode20, diode21, diode22, diode23 +30 |
| 46 | switch | rick-kicad-footprints:100-minimal-no-3d | switch1, switch2, switch10, switch11, switch12, switch13, switch14, switch15, switch16, switch17, switch18, switch19, switch20, switch21, switch22, switch23 +30 |
| 4 | Heatsink | footprints:hole-three | HS5, HS6, HS7, HS8 |
| 4 | Heatsink | footprints:baldy_luv_u | HS1, HS2, HS3, HS4 |
| 2 | Conn_02x05_Odd_Even | footprints:connector-shrouded | J1, J2 |
| 1 | promicro | footprints:promicro | U1 |
Questions
How big is the Slepet PCB?
It measures 311 × 803 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Slepet use?
103 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slepet KiCad files?
From the ibnuda/Slepet repository on GitHub, at the commit this page was made from: the board is Slepet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slepet design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers134 × 88 mm
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 2 layers97 × 69.5 mm
- 2 layers182.8 × 169.2 mm
ErgoMaxLeft
LouWii/ErgoMax
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
103 parts124 - 2 layers164 × 151 mm
Parametric speaker
Orange-Murker/parametric_speaker
A directional speaker with a driver based on STM32
103 parts103 - 2 layers210.5 × 114.8 mm
Breeze right
afternoonlabs/BreezeKeyboard
Breeze is a split mechanical keyboard with a column-staggered layout. With a focus on productivity, Breeze features a full 6x4 alphanumeric layout, arrow keys, and an extra 6 key cluster for typing and coding.
103 parts83 - 2 layers100 × 100 mm
BulkyMIDI-32 Channel 2
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
103 parts80CC-BY-SA-4.0 - 2 layers309 × 104.1 mm
