

Waleed Keeb Final
I am a custom keyboard for hackclub keeb
- Size
- 362 × 138.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 188
- Nets
- 149
- Pads
- 682
- Tracks, vias
- 576, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Jun 2026
- Updated
- 15 Jun 2026
Overview
Waleed Keeb Final is an open-source printed circuit board by Ibne-billa, from the Ibne-billa/custom-keyboard repository on GitHub. It is a 2-layer board of 362 × 138.1 mm with 188 parts on 149 nets, routed with 576 tracks and 8 vias.
Its parts include 84 diodes, 84 switches and 1 resistor. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdcustom-keyboard
Hi, I am building a custom keyboard for the HackClub Keeb project. Huge thanks to HackClub for giving me this opportunity to finally bring this idea to life.
For the past ~4 months, my laptop keyboard has had broken G and H keys. The replacement was very expensive, and typing on it became really frustrating. This project is my way of solving that problem while also learning PCB design and embedded systems.
Thanks again to HackClub for giving me a platform where I can express myself and build something useful instead of just dealing with a broken keyboard.
Design Overview
My design is fairly simple and practical.
I am using a Raspberry Pi Pico as the main controller.
The keyboard layout is based on Cool84.
I have also added support for an RGB LED strip, which I plan to connect later for lighting effects.
Keyboard Layout:
PCB Design Process
- Keyboard Matrix Design
First, I created the switch matrix for the keyboard.
- RGB Strip Connection
Then I designed the connections for the RGB LED strip.
After that, I connected everything to the Raspberry Pi Pico.
PCB Assembly (Most Challenging Part)
The hardest part of this project was assembling everything properly in the PCB editor.
In my first design, I made many mistakes:
Forgot to add mounting holes Placed the Pico on the wrong side Messed up multiple nets and connections
After a lot of trial and error, I finally managed to create a clean design with no major errors.
Here is the final PCB design:
Next, I started working on the case. Compared to the PCB, this part was easier because the design is simple.
The case has:
Bottom plate
Side walls
Space for a clear top sheet (for aesthetics and protection)
Final Note
This project has been a big learning experience for me in PCB design, embedded systems, and hardware development. I made mistakes, fixed them, and learned a lot through the process.
Note on writing: English is not my first language. I used ChatGPT only to improve the grammar and structure of this README. All ideas, design work, PCB development, and project decisions were done by me without AI assistance.
Parts
188| Qty | Value | Footprint | References |
|---|---|---|---|
| 84 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +68 |
| 84 | SW_Push | PCM_marbastlib-mx:SW_MX_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +68 |
| 10 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H7, H9, H10 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.25u | SEnter1, SLeftShift1 |
| 1 | 330 Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RGB_Strip_Connector1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | SBackSpace1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_6.25u | SSpace1 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_Common_THT | A1 |
Similar boards
- 2 layers76.6 × 76 mm

- 2 layers213 × 65 mm

- 2 layers243.4 × 76.7 mm

Steamvan
jmdaly/steamvan
KiCAD design files for the SteamVan PCB - a 40% keyboard PCB based on an STM32 MCU
188 parts76CC-BY-SA-4.0 - 2 layers99.7 × 99.7 mm

Drummaster rev2
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
188 parts75 - 2 layers338.1 × 135 mm

Seigaiha
yiancar/Seigaiha
A Alice layout throughole keyboard with USBC. Inspired by the Plaid and TGR Alice
188 parts64 - 2 layers322.7 × 132.7 mm

- 2 layers232.2 × 76.7 mm

- 2 layers97 × 99 mm

Proto quarter panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
188 parts40
Questions
How big is the Waleed Keeb Final PCB?
It measures 362 × 138.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Waleed Keeb Final use?
188 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Waleed Keeb Final KiCad files?
From the Ibne-billa/custom-keyboard repository on GitHub, at the commit this page was made from: the board is Waleed_Keeb_Final/Waleed_Keeb_Final.kicad_pcb and its schematic Waleed_Keeb_Final/KeyBoard_Matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Waleed Keeb Final design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ibne-billa before reusing the design.