

Educ 8 timing
EDUC-8 recreation by Gwyllym Suter
- Size
- 220 × 159.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 116
- Pads
- 384
- Tracks, vias
- 1,289, 155
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Mar 2023
- Updated
- 28 May 2026
Overview
Educ 8 timing is an open-source printed circuit board by ibm2030, from the ibm2030/EDUC8 repository on GitHub. It is a 4-layer board of 220 × 159.9 mm with 46 parts on 116 nets, routed with 1,289 tracks and 155 vias.
It is built around the 74LS00SC, 74LS04PC and 74LS10PC, with the 74LS139PC, 74LS161DC and 74LS20P-E among its other parts. Its parts include 21 ICs, 10 capacitors, 7 resistors, 4 connectors and 1 transistor.
Main components
774LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS10PC
PDIP-140℃~+70℃ 3 3.3mA 4.75V~5.25V 74LS Series NAND Gate PDIP-14 Logic GatesonsemiLogic Gates74LS139PC
PDIP-1622ns 74LS 8mA Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, DecodersonsemiSignal Switches, Multiplexers, Decoders74LS161DC
-0℃~+70℃ 14ns 32MHz 4 4.75V~5.25V 74LS 93mW Asynchronous Binary Counter Programmable divide ratio、Reset function、Cascade counter、Synchronous counting Rising Edge Synchronous - Counters, DividersTexas InstrumentsCounters, Dividers74LS20P-E
DIP-14-20℃~+75℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400mV、500mV 400uA 74LS 800mV 8mA NAND Gate DIP-14 Logic Gates ROHSRenesas ElectronicsLogic GatesBC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdEDUC8
EDUC-8 recreation by Gwyllym Suter
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 74LS00 | Package_DIP:DIP-14_W7.62mm_LongPads | U2, U7, U8, U9, U10, U13, U16, U18, U21 |
| 4 | 100nF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C4, C5, C7, C8 |
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C6, C9, C10 |
| 4 | 74LS04 | Package_DIP:DIP-14_W7.62mm_LongPads | U3, U15, U17, U20 |
| 3 | 2k2 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R6, R7 |
| 2 | 74LS10 | Package_DIP:DIP-14_W7.62mm_LongPads | U4, U19 |
| 2 | 74LS73 | Package_DIP:DIP-14_W7.62mm_LongPads | U12, U14 |
| 2 | Card_handle | EDUC-8:Card_handle | H1, H2 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 220pF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 2K2 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4 |
| 1 | 32-way-pcb-edge-Educ-8-connectors | Connector_PCBEdge:PCB_32pin | J1 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 74154 | Package_DIP:DIP-24_W15.24mm_LongPads | U11 |
| 1 | 74LS13 | Package_DIP:DIP-14_W7.62mm_LongPads | U6 |
| 1 | 74LS161 | Package_DIP:DIP-16_W7.62mm_LongPads | U5 |
| 1 | 74LS20 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | BC548 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | CLK | Connector_Pin:Pin_D1.0mm_L10.0mm | J2 |
| 1 | Conn_01x03_Male | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | ~RST | Connector_Pin:Pin_D1.0mm_L10.0mm | J3 |
The 45 most common of 46 parts.
More from ibm2030/EDUC8
12- 2 layers283 × 96 mm

- 2 layers306 × 145 mm

- 2 layers220 × 160 mm

- 4 layers180 × 95 mm

- 2 layers150 × 100 mm

- 2 layers150 × 100 mm

- 2 layers150 × 100 mm

- 2 layers140 × 100 mm

- 2 layers125 × 113 mm

- 2 layers236 × 171 mm

- 2 layers283 × 96 mm

- 2 layers210.8 × 116.8 mm

Similar boards
- 2 layers365.1 × 203.2 mm

DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 2 layers486 × 306.3 mm

- 2 layers630 × 300 mm

- 2 layers364 × 203 mm

- 2 layers279 × 134.6 mm

K-1008-visable memory
schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.
144 parts - 2 layers

- 2 layers299.2 × 180 mm

- 2 layers385 × 230 mm

Questions
How big is the Educ 8 timing PCB?
It measures 220 × 159.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Educ 8 timing use?
46 parts, built around the 74LS00SC, 74LS04PC, 74LS10PC and 74LS139PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Educ 8 timing KiCad files?
From the ibm2030/EDUC8 repository on GitHub, at the commit this page was made from: the board is Timing/educ 8 timing .kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Educ 8 timing design in my own project?
Its repository states no licence, so its author keeps all rights: ask ibm2030 before reusing the design.