Skip to the content
2 layers220 × 160 mmAccumulator, the printed circuit board in 3D

Accumulator

ibm2030/EDUC813

EDUC-8 recreation by Gwyllym Suter

Size
220 × 160 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
50
Pads
192
Tracks, vias
704, 94
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
5 Mar 2023
Updated
28 May 2026

Overview

Accumulator is an open-source printed circuit board by ibm2030, from the ibm2030/EDUC8 repository on GitHub. It is a 2-layer board of 220 × 160 mm with 23 parts on 50 nets, routed with 704 tracks and 94 vias.

It is built around the 74LS00SC, 74LS05P-E and 74LS04PC, with the 74LS10PC among its other parts. Its parts include 10 ICs, 4 capacitors, 4 resistors and 2 connectors.

Main components

4

README

README.md

EDUC8

EDUC-8 recreation by Gwyllym Suter

Parts

23
QtyValueFootprintReferences
447nFCapacitor_THT:C_Rect_L11.0mm_W2.8mm_P10.00mm_MKTC1, C2, C3, C4
32K2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3, R4
216-way-pcb-edge-Educ-8-connectorsConnector_PCBEdge:PCB_16pinJ1, J2
274LS00Package_DIP:DIP-14_W7.62mm_LongPadsU7, U9
274LS01Package_DIP:DIP-14_W7.62mm_LongPadsU5, U10
274LS05Package_DIP:DIP-14_W7.62mm_LongPadsU2, U4
274LS95Package_DIP:DIP-14_W7.62mm_LongPadsU1, U3
2Card_handleEDUC-8:Card_handleH1, H2
174LS04Package_DIP:DIP-14_W7.62mm_LongPadsU6
174LS10Package_DIP:DIP-14_W7.62mm_LongPadsU8
1820Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1

The 22 most common of 23 parts.

More from ibm2030/EDUC8

12
  • 2 layers283 × 96 mmFront panel 9602, the printed circuit board in 3D

    Front panel 9602

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    164 parts13
  • 2 layers306 × 145 mmASCII keyboard, the printed circuit board in 3D

    ASCII keyboard

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    131 parts13
  • 2 layers220 × 160 mmMusic player, the printed circuit board in 3D

    Music player

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    121 parts13
  • 2 layers150 × 100 mmKeyboard interface, the printed circuit board in 3D

    Keyboard interface

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    76 parts13
  • 2 layers150 × 100 mmKeyboard interface, the printed circuit board in 3D

    Keyboard interface

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    76 parts13
  • 2 layers150 × 100 mmKeyboard interface 3, the printed circuit board in 3D

    Keyboard interface 3

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    75 parts13
  • 2 layers140 × 100 mmOctal display, the printed circuit board in 3D

    Octal display

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    74 parts13
  • 2 layers125 × 113 mmE8Serial, the printed circuit board in 3D

    E8Serial

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    53 parts13
  • 2 layers236 × 171 mmMultiplexer, the printed circuit board in 3D

    Multiplexer

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    53 parts13
  • 2 layers283 × 96 mmMotherboard, the printed circuit board in 3D

    Motherboard

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    51 parts13
  • 2 layers210.8 × 116.8 mmEDUC-8 SMPS PSU, the printed circuit board in 3D

    EDUC-8 SMPS PSU

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    49 parts13

Similar boards

  • 2 layers98.3 × 107.1 mmCoco9511pak, the printed circuit board in 3D

    Coco9511pak

    barberd/coco9511pak

    This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.

    44 parts13GPL-3.0
  • 2 layers478 × 183 mmHC2000, the printed circuit board in 3D

    HC2000

    badrianiulian/HC2000

    HC2000 Project

    259 parts9
  • 2 layers400.9 × 280.5 mmAleste520v4, the printed circuit board in 3D

    Aleste520v4

    lucedoriente/Aleste520ex

    Western version of 1993 Z80 russian computer

    345 parts4GPL-3.0
  • 2 layers325 × 209 mmBIT90 26 Prototype, the printed circuit board in 3D

    BIT90 26 Prototype

    BrettHallen/BIT90_26

    An attempted recreation of the 1983 HIT90 computer.

    184 parts3
  • 2 layers254 × 134.6 mmZ80-CPU, the printed circuit board in 3D

    Z80-CPU

    CatspersCoffee/S100-Boards

    S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

    163 parts
  • 2 layers365.1 × 203.2 mmDIAG, the printed circuit board in 3D

    DIAG

    Nakazoto/CenturionComputer

    This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

    150 parts172
  • 2 layers299.2 × 180 mm2layer, the printed circuit board in 3D

    2layer

    ceteras/CoBra

    A Z80 retro computer, ZX Spectrum compatible, can also run CP/M.

    369 parts11MIT
  • 2 layers364 × 203 mmCPU6S, the printed circuit board in 3D

    CPU6S

    Meisaka/CenMiniCom

    Centurion Minicomputer Schematics

    240 parts8

Questions

How big is the Accumulator PCB?

It measures 220 × 160 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Accumulator use?

23 parts, built around the 74LS00SC, 74LS05P-E, 74LS04PC and 74LS10PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Accumulator KiCad files?

From the ibm2030/EDUC8 repository on GitHub, at the commit this page was made from: the board is Accumulator/Accumulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Accumulator design in my own project?

Its repository states no licence, so its author keeps all rights: ask ibm2030 before reusing the design.