Skip to the content
2 layers120 × 25 mmGrooveboard rp, the printed circuit board in 3D

Grooveboard rp

ianklug/grooveboard58

A four-key mechanical keyboard for rhythm games.

Size
120 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
27
Pads
207
Tracks, vias
353, 13
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 May 2021
Updated
6 Mar 2024

Overview

Grooveboard rp is an open-source printed circuit board by ianklug, from the ianklug/grooveboard repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 120 × 25 mm with 47 parts on 27 nets, routed with 353 tracks and 13 vias.

It is built around the RP2040, W25Q128JVSIQ and AP2112K-3.3. Its parts include 16 capacitors, 8 resistors, 6 switches, 3 ICs and 1 diode. It belongs with the RP2040 boards of this library.

Main components

3

README

README.md

Grooveboard

A four-key mechanical keyboard for rhythm games.

Grooveboard PCB

Design by ianklug. Art by clue.

Special thanks to Sebastiaan Swinkels for technical assistance.

Made with KiCad.

Please clone this repository using the --recurse-submodules flag. Some of the required symbol and footprint libraries will not be included otherwise.

Versions

Please note that the RP2040 models are functional at a hardware level, but software is incomplete.

The 2.x versions (grooveboard-rp) use the RP2040 MCU, and require different firmware from the 1.x versions. They also include a few new features and refinements over the 1.x models, including M2 mounting holes and improved key spacing.

The 1.x versions (grooveboard-atmel) use the Atmega32U4 MCU, in either the MU or AU footprint. These versions are no longer recommended.

There are three types of Grooveboard, each supporting different types of switches.

Grooveboard: Compatible with MX, Choc, or Alps-style switches. Switches must be soldered.

Grooveboard MX: Compatible with MX-style switches only. Uses Kailh MX hot-swap sockets.

Grooveboard Choc: Compatible with Choc-style switches only. Uses Kailh Choc hot-swap sockets.

Firmware

Grooveboard is powered by QMK Firmware.

Grooveboard ships by default with firmware supporting VIA Configurator. To modify your keymap, install VIA Configurator, plug in your Grooveboard, and begin customizing. Changes will be applied immediately.

For more advanced functionality, you may also customize Grooveboard using QMK Configurator, or by using QMK on the command line. This will require a reflash of your board's firmware. Use QMK Toolbox to flash if on Windows or MacOS, or the QMK CLI with avrdude on Linux.

Manufacturing

Manufacture at your own risk. I can not guarantee the quality or functionality of boards not sold directly by me.

Please note that most PCB manufacturers have a minimum order quantity of five units.

Hand-soldering Grooveboards from scratch is extremely difficult and NOT recommended due to the small size of the surface-mount components and their pads. Instead, PCB assembly services can source and assemble all the small parts on the bottom of the board. Depending on the manufacturer, you may only need to hand-solder some of the larger parts, such as the USB port and the switches/sockets.

I can personally recommend JLCPCB or PCBWay, but most PCB manufacturers should be capable of producing Grooveboard.

Zipped gerber files are present for the production designs of each variation of Grooveboard. They are called <variation>-gerbers-<version>.zip and should be compatible with most PCB manufacturing services.

If you will be ordering from JLCPCB, use <variation>-gerbers-jlcpcb-<version>.zip. These gerbers have the JLCPCB serial number placed in an easily-readable location on the back of the board. Make sure to choose "Specify a location" under "Remove Order Number" so that this number is printed where expected.

Production Grooveboards are two-layer FR4, 1.6mm thick. The RP2040 versions measure 120x25mm. They are assembled using lead-free solder. BOM and Centroid files are present for each board in the format expected by JLCPCB.

The USB connector is a GCT USB4085. The hot-swap sockets are Kailh sockets. Sockets are different for MX switches and Choc switches! Make sure to use the right kind for the model you have chosen.

License

Shield: CC BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

CC BY-SA 4.0

Parts

47
QtyValueFootprintReferences
10100nFKeebio-Parts:C_0402C3, C8, C9, C10, C11, C12, C13, C14, C15, C16
4LOGOgrooveboard:left-arrowG***, G***, G***, G***
4MX-NoLEDKeebio-Parts:MX-Alps-Choc-1U-NoLEDK1, K2, K3, K4
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
210pFKeebio-Parts:C_0402C6, C7
210uFKeebio-Parts:C_0402C1, C2
21kKeebio-Parts:R_0402R6, R8
21uFKeebio-Parts:C_0402C4, C5
227Keebio-Parts:R_0402R4, R5
25.1kKeebio-Parts:R_0402R2, R3
110kKeebio-Parts:R_0402R7
112MHzKeebio-Parts:Crystal_SMD_3225-4pin_3.2x2.5mmY1
120V 1AKeebio-Parts:D_SOD-323D1
1500mAKeebio-Parts:Fuse_0805F1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1BOOTkicad-open-modules:TS-1187A-B-A-BSW1
1DNPKeebio-Parts:R_0402R1
1LOGOgrooveboard:kayboards-logoG***
1LOGOgrooveboard:grooveboard-logoG***
1RESETkicad-open-modules:TS-1187A-B-A-BSW2
1RP2040rp2040:RP2040U1
1USB_C_Receptacle_USB2.0Type-C:USB_C_GCT_USB4085J1
1W25Q128JVwinbond:W25Q128JVPIQU2

More from ianklug/grooveboard

1
  • 2 layers118.1 × 22.9 mmGrooveboard mx atmel mu, the printed circuit board in 3D

    Grooveboard mx atmel mu

    ianklug/grooveboard

    A four-key mechanical keyboard for rhythm games.

    29 parts58CC-BY-SA-4.0

Similar boards

  • 2 layers312.5 × 122.3 mmSHEGO75-V5, the printed circuit board in 3D

    SHEGO75-V5

    Charading/Shego75HE

    My endgame 75% hall effect keyboard

    392 parts75
  • 2 layers220 × 70 mmBemini rp, the printed circuit board in 3D

    Bemini rp

    ianklug/bemini

    A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.

    70 parts55CC-BY-SA-4.0
  • 2 layers84.2 × 100 mmFabpack out v5 8, the printed circuit board in 3D

    Fabpack out v5 8

    yuz207/agentpad13

    agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)

    126 parts41
  • 2 layers100 × 90 mmEncoderPad RP2040, the printed circuit board in 3D

    EncoderPad RP2040

    jpconstantineau/EncoderPad_RP2040

    The EncoderPad RP2040 is a Video Editing Macropad with a 60mm Encoder Wheel. This encoder is made of metal and feels like it will last forever. The EncoderPad uses 9 mechanical switches (Cherry MX type).

    62 parts29
  • 2 layers75 × 55 mmWellfed bench, the printed circuit board in 3D

    Wellfed bench

    Isaac-Duarte/wellfed

    Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.

    93 parts8MIT
  • 2 layers19.9 × 29 mmRpipico, the printed circuit board in 3D

    Rpipico

    ambraglow/proto2040

    41 parts6
  • 2 layers42 × 42 mmLoadcellSensor, the printed circuit board in 3D

    LoadcellSensor

    jujojujo2003/Ender-3-3DPrinter-Load-Cell-Bed-Leveling-Sensor

    This is a Load Cell based bed leveling sensor based on the RP2040 and TI ADS1235 ADC that should mount onto any vertical MGN12H gantry. My printer is an Ender 3 with a bunch of linear rail mods.

    56 parts5MIT

Questions

How big is the Grooveboard rp PCB?

It measures 120 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Grooveboard rp use?

47 parts, built around the RP2040, W25Q128JVSIQ and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Grooveboard rp KiCad files?

From the ianklug/grooveboard repository on GitHub, at the commit this page was made from: the board is grooveboard-rp/grooveboard-rp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Grooveboard rp design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).