
Bno08x i2c board v4-square panel
tgodfrey0/BNO08x-I2C-PCBs
This repository contains W.I.P. code and hardware designed for a 9DOF sensor module using a BNO085.

ブレッドボード型の半田ブリッジで回路を作る基板
CablelessBB is an open-source printed circuit board by i386koba, from the i386koba/cirlutionPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 462 parts on 86 nets, routed with 1,218 tracks and 240 vias.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 300 | Jumper_NO_Small | lib:jump | JP1, JP10, JP11, JP100, JP101, JP102, JP103, JP104, JP105, JP106, JP107, JP108, JP109, JP110, JP111, JP112 +284 |
| 60 | CONN_01X02 | lib:2P | P11, P12, P100, P103, P104, P107, P108, P111, P112, P115, P116, P119, P120, P123, P124, P127 +44 |
| 60 | CONN_01X06 | lib:6p | P10, P13, P101, P102, P105, P106, P109, P110, P113, P114, P117, P118, P121, P122, P125, P126 +44 |
| 30 | Jumper_NO_Small | lib:j-mini | JP241, JP246, JP247, JP252, JP253, JP258, JP259, JP264, JP265, JP270, JP271, JP276, JP277, JP282, JP283, JP288 +14 |
| 4 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P2, P3, P66, P67 |
| 4 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P1, P4, P65, P68 |
The 458 most common of 462 parts.

tgodfrey0/BNO08x-I2C-PCBs
This repository contains W.I.P. code and hardware designed for a 9DOF sensor module using a BNO085.

Bu3nd14/EDA
Scripted analog EDA + PCB automation environment (KiCad 10 + ngspice + SKiDL) for macOS Apple Silicon

Niqtan/Pagtingin-to-Highway
Version of Pagtingin Repo for Hack Club's Highway Program


benanderman/spork-8
An 8-bit CPU, made with TTL chips on custom, modular PCBs. Includes board designs, and Arduino code to program its instruction set and programs.

dvhx/smd-soldering-exercise-0805
Ultimate SMD soldering exercise full of 0805 resistor and caps, SOT-23 transistors and SOIC-8 opamps - 23 guitar pedals on one 10x10cm PCB.

ArielRobotti/MagneticFieldDetector
Detector de polaridad de campo magnético para Mago :)

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
462 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the i386koba/cirlutionPCB repository on GitHub, at the commit this page was made from: the board is cablelessBB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).