
GreatFET neighbor
HWS-XMS/SecureSDCards
Artifacts for our work accepted at HASP2026 called "Secure SD Cards: A Threat Model and Security Analysis"

Artifacts for our work accepted at HASP2026 called "Secure SD Cards: A Threat Model and Security Analysis"
SDCardInterposer is an open-source printed circuit board by HWS-XMS, from the HWS-XMS/SecureSDCards repository on GitHub, published under the MIT licence. It is a 2-layer board of 90.1 × 24 mm with 20 parts on 18 nets, routed with 110 tracks and 11 vias.
Its parts include 8 connectors, 1 capacitor and 1 resistor.
An SD-card-form-factor interposer that taps the card bus for protocol capture. Cutting the DAT1 and DAT2 traces forces commodity readers to fall back to the single-bit SD protocol, which an affordable logic analyzer can sample.
Open SDCardInterposer.kicad_pro in KiCad. Approximate build cost: $15.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J7 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J6, J8 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2 |
| 1 | clipboard:a1a3a784-bf70-4aec-a8ab-07f3e34a767b | ||
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J4 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | MEM2067-02-180-00-A_REVB | SDCard:GCT_MEM2067-02-180-00-A_REVB | J5 |
| 1 | R_SHUNT | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | SD_Card_Device | Connector_Card:SD_Card_Device_16mm_SlotDepth | J1 |

HWS-XMS/SecureSDCards
Artifacts for our work accepted at HASP2026 called "Secure SD Cards: A Threat Model and Security Analysis"



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
It measures 90.1 × 24 mm and has 2 copper layers, 1.6 mm thick.
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HWS-XMS/SecureSDCards repository on GitHub, at the commit this page was made from: the board is hardware/sd-interposer/SDCardInterposer.kicad_pcb and its schematic hardware/greatfet-neighbor/GreatFET-neighbor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).