2 layers110.7 × 62 mm
15pinproto
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
49 parts3MIT
2 layers51.6 × 51.8 mm
Casio VX Debug Unit
hwreverse/PokeconDebug3Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
- Size
- 51.6 × 51.8 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 17
- Nets
- 30
- Pads
- 88
- Tracks, vias
- 222, 158
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jan 2020
- Updated
- 25 Aug 2020
Overview
Casio VX Debug Unit is an open-source printed circuit board by hwreverse, from the hwreverse/PokeconDebug repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.6 × 51.8 mm with 17 parts on 30 nets, routed with 222 tracks and 158 vias.
README
Casio/Casio PB-1000 Debug Unit/README.mdCasio PB-1000/2000C/AI-1000 System Bus Debug Board
SALEAE Logic Analyzer friendly (Ground pins with every Bus Pin, Groups of 2x4)
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J5, J7, J8, J11, J12, J13 |
| 2 | SolidPad-Connector | Connector:SolidPad_4x4mm_2x2mmCore | J2, J3 |
| 1 | ADDR+CS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Busy+PN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | CASIO_VX_2x15_1.27_Interface | hwreverse:Connector_Casio_2x15_1.27_SYSBUS | J6 |
| 1 | D0-D3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | D4-D7 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | Enables+Init+Reset | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Serial 1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | Serial 2 + Strobe | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J17 |
Questions
How big is the Casio VX Debug Unit PCB?
It measures 51.6 × 51.8 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Casio VX Debug Unit use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Casio VX Debug Unit KiCad files?
From the hwreverse/PokeconDebug repository on GitHub, at the commit this page was made from: the board is Casio/Casio VX Debug Unit/Casio VX Debug Unit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Casio VX Debug Unit design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from hwreverse/PokeconDebug
5- 2 layers75.4 × 45.7 mm
Sharp 11Pin Breadboard
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
28 parts3MIT - 2 layers45 × 53.3 mm
Casio PB-1000 Debug Unit
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
17 parts3MIT - 2 layers19.3 × 29.8 mm
Sharp 11pin to 15pin Adapter
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
6 parts3MIT - 2 layers29.5 × 44 mm
Sharp PC-1600 MemCard
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
5 parts3MIT
Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
