
Haxophone001
cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Snackymini Keyboard
Snackymini keyboard is an open-source printed circuit board by huytd, from the huytd/snackymini-keyboard repository on GitHub. It is a 2-layer board of 258.3 × 196 mm with 92 parts on 73 nets, routed with 464 tracks and 10 vias.
Its parts include 45 diodes, 45 switches and 2 ICs. It belongs with the keyboards and input boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

QWERTY Layout:

Dvorak Layout:

Inspired by MiniVan Arrow Layout http://www.keyboard-layout-editor.com/#/gists/174470794149140f43dd6c9b544c168c
Schema:

PCB:

PCB render:

First, you'll need to install KiCad, then you can open the PCB project in hardware folder to edit the PCB/Layout as you wish.
I have included the snackymini-manufacturing-submission.zip file containing all of the gerber files needed so you can send it to the manufacturer directly.
Ater having the PCB printed, you can use Arduino IDE (with Teensyduino installed) to compile the code in firmware folder, then upload it to your Teensy.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | D | prototype:D_axial | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 45 | SW_PUSH | prototype:CHERRY_PLATE_100H | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +29 |
| 2 | Teensy3.2 | prototype:TeensySimple | U1, U1 |

cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
It measures 258.3 × 196 mm and has 2 copper layers, 1.6 mm thick.
92 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the huytd/snackymini-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/snackymini-keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask huytd before reusing the design.