Skip to the content
2 layers102 × 71.5 mmPosture pad, the printed circuit board in 3D
Size
102 × 71.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
60
Pads
152
Tracks, vias
407, 69
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Oct 2025
Updated
28 Sep 2026

Overview

Posture pad is an open-source printed circuit board by HusseinKhodor03, from the HusseinKhodor03/posture-pad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 102 × 71.5 mm with 23 parts on 60 nets, routed with 407 tracks and 69 vias.

It is built around the CD74HC4067M. Its parts include 18 resistors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

posture-pad

Parts

23
QtyValueFootprintReferences
102kResistor_SMD:R_0603_1608MetricR5, R6, R7, R8, R9, R14, R15, R16, R17, R18
810kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R10, R11, R12, R13
2CD74HC4067MPackage_SO:SOIC-24W_7.5x15.4mm_P1.27mmU1, U2
2Conn_01x18Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_VerticalJ1, J2
1Adafruit_Feather_HUZZAH32_ESP32Module:Adafruit_Feather_WithMountingHolesA1

Similar boards

  • 2 layers312 × 140 mmTsynth2 Rev1.3, the printed circuit board in 3D

    Tsynth2 Rev1.3

    Electrotechnique/TSynth-Teensy4.1

    TSynth for Teensy 4.1

    108 parts182
  • 2 layers422.4 × 118.2 mmMidiMood (tht), the printed circuit board in 3D

    MidiMood (tht)

    silveirago/MidiMood

    This repository contains the code for a custom MIDI controller project called MidiMood, built using an ATmega32U4 microcontroller (or similar).

    53 parts82
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76
  • 4 layers100 × 100 mmOPDM, the printed circuit board in 3D

    OPDM

    brenonsantos/OpenPDM

    OpenPDM is an open-source programable Power Distribution Module for your car

    156 parts75MIT
  • 2 layers215.9 × 101.6 mmIps20, the printed circuit board in 3D

    Ips20

    gzweigle/open-hybrid-piano

    Building a hybrid MIDI digital piano

    135 parts61GPL-3.0
  • 2 layers152.4 × 95.3 mmControl board, the printed circuit board in 3D

    Control board

    carsonrobles/fpga-guitar-pedal

    FPGA based guitar effect station.

    51 parts36
  • 2 layers100 × 100 mmEavesdrum module, the printed circuit board in 3D

    Eavesdrum module

    tobigun/EavesDrum

    EavesDrum is an e-drum trigger module project, designed for musicians and makers. It allows you to connect drum pads or piezo triggers and converts their signals into MIDI events.

    103 parts25GPL-3.0
  • 4 layers33 × 65.5 mmOM FlexGrid Rigid PCB, the printed circuit board in 3D

    OM FlexGrid Rigid PCB

    Open-Muscle/OpenMuscle-FlexGrid

    60-sensor wearable with flexible PCB and pressure matrix

    65 parts19CERN-OHL-S-2.0

Questions

How big is the Posture pad PCB?

It measures 102 × 71.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Posture pad use?

23 parts, built around the CD74HC4067M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Posture pad KiCad files?

From the HusseinKhodor03/posture-pad repository on GitHub, at the commit this page was made from: the board is hardware/kicad/PosturePad/PosturePad.kicad_pcb and its schematic hardware/kicad/PosturePad/PosturePad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Posture pad design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).