2 layers50 × 35 mm
2 layers73.9 × 73.2 mm
Hardware Sources
hulkco/-Badge_moon4A reverse led Badge, tha use at Digispark clone (attiny85) as microprocessor
- Size
- 73.9 × 73.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 9
- Pads
- 34
- Tracks, vias
- 109, 14
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Nov 2019
- Updated
- 12 Nov 2019
Overview
Hardware Sources is an open-source printed circuit board by hulkco, from the hulkco/-Badge_moon repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 73.9 × 73.2 mm with 17 parts on 9 nets, routed with 109 tracks and 14 vias.
Its parts include 6 diodes, 5 ICs, 2 connectors, 1 resistor and 1 switch.
README
README.mdBadge_moon
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED | Moon_75mm_Gaviota:SunLed_PLCC_Reverse-2 | D1, D2, D3, D4, D5, D6 |
| 1 | Battery_Cell | Moon_75mm_Gaviota:S8211R | BT1 |
| 1 | Conn_01x02 | Moon_75mm_Gaviota:JST-S2B-PH-SM4-TB | J1 |
| 1 | Conn_01x06_x03 | Moon_75mm_Gaviota:Digispark_SMD_Reverse | J2 |
| 1 | Firma | Moon_75mm_Gaviota:firma_Cu_Mask | U2 |
| 1 | OSHW_Silk | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | U5 |
| 1 | Oshpark_Purple | Moon_75mm_Gaviota:OSHpark-2-1800 | U4 |
| 1 | Oshpark_logo | Moon_75mm_Gaviota:OSHpark-1-1200 | U3 |
| 1 | PCB | Moon_75mm_Gaviota:Moon_6_Leds_75_2 | U1 |
| 1 | R_Small | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | SW_Push_Dual | Moon_75mm_Gaviota:SW_Push_PTS647_4.5mm | SW2 |
| 1 | Val** | Moon_75mm_Gaviota:Moon_ATtiny85 | Ref** |
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the Hardware Sources PCB?
It measures 73.9 × 73.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hardware Sources use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hardware Sources KiCad files?
From the hulkco/-Badge_moon repository on GitHub, at the commit this page was made from: the board is Hardware_Sources/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hardware Sources design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).