2 layers114.1 × 30 mm
6 layers47.2 × 22 mm
Microcyte
hughmor/hughmor.github.ioMy personal Github Pages website
- Size
- 47.2 × 22 mm
- Copper layers
- 6
- Thickness
- 0.87 mm
- Parts
- 40
- Nets
- 40
- Pads
- 232
- Tracks, vias
- 665, 243
- Pours
- 310
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Mar 2022
- Updated
- 23 Oct 2026
Overview
Microcyte is an open-source printed circuit board by hughmor, from the hughmor/hughmor.github.io repository on GitHub. It is a 6-layer board of 47.2 × 22 mm with 40 parts on 40 nets, routed with 665 tracks and 243 vias.
Its parts include 30 capacitors, 3 resistors, 3 ICs and 1 connector.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 1u | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C23, C24, C25, C27 +5 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C4, C6, C16, C26, C29 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R3, R5 |
| 3 | 47n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C5 |
| 2 | LTC2662HUH-12-PBF | LTC2662:05-08-1693_ADI | U1, U2 |
| 1 | Conn_02x38_Odd_Even | M:Connector_M.2_key-E | J1 |
| 1 | LOGO | logos:queens_logo_silk_5mm | G*** |
| 1 | LOGO | microcyte:astrocyte_mirrored_inv | G*** |
| 1 | LTC2664HUH-12-PBF | LTC2662:05-08-1693_ADI | U3 |
The 39 most common of 40 parts.
Questions
How big is the Microcyte PCB?
It measures 47.2 × 22 mm and has 6 copper layers, 0.87 mm thick.
What parts does the Microcyte use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microcyte KiCad files?
From the hughmor/hughmor.github.io repository on GitHub, at the commit this page was made from: the board is assets/kicad/microcyte/microcyte.kicad_pcb and its schematic assets/kicad/microcyte/microcyte.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microcyte design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughmor before reusing the design.
More from hughmor/hughmor.github.io
1Similar boards
- 6 layers86.4 × 54.6 mm
Porcupine 5.1.2.routed
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
40 parts7BSD-3-Clause - 6 layers82 × 42 mm
Hr30-motion controller p0.1
amyleesterling/humanoid-robot
detailed specs to build a humanoid robot (with kids)
40 parts - 6 layers45.7 × 42.2 mm
Dev board
ericpearson1313/tt_pump_out_chip
60 Hz Liquid‑Pump Controller ASIC with Current‑Drop Shutoff
40 partsApache-2.0 - 6 layers
Misc circuits
spacecraft-design-lab-2019/solar-misc-circuits
Circuit "blocks" for the energy harvesting, burn wire, photosensor, and FPC connector circuits
40 parts - 6 layers15.2 × 20.3 mm
SilentStepStick TMC5160 v13
TheHoodedFoot/wizzy
Hardware and software for the WYSIWYG laser camera system
39 parts - 6 layers76.2 × 76.2 mm
- 6 layers
Ppg pcb v08 via split
holison-001/MVP-PPG
기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.
39 parts - 6 layers31.1 × 10.9 mm
Emg afe module
Genabl/parasitic_monorepo
Second-board regression target for the volume-conductor pipeline.
39 partsMIT