
Compute
hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

Kicad design files for prism laser direct imager using up5k FPGA and ESP32
Topplate is an open-source printed circuit board by hstarmans, from the hstarmans/firestarter repository on GitHub. It is a 2-layer board of 99.7 × 59 mm with 7 parts on 4 nets.
Its parts include 4 connectors and 3 inductors. It belongs with the fPGA and programmable logic boards and the ESP32 and FPGA and CPLD boards of this library.

Carrier PCB for the laser diode module inside the scanhead housing. Provides pogo-pin connection to the back plate of the laserhead. Solder contacts provide opton to determine pin routing.
Part of the Hexastorm (Firestarter) open-hardware laser direct imaging project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | footprints:throughholeplate | J1, J2, J3, J4 |
| 2 | Logo_Open_Hardware_Large | footprints:hexastorm | L1, L2 |
| 1 | Logo_Open_Hardware_Large | footprints:lasersafety | L3 |

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 99.7 × 59 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hstarmans/firestarter repository on GitHub, at the commit this page was made from: the board is lasermodule/topplate/topplate.kicad_pcb and its schematic base/camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hstarmans before reusing the design.