Skip to the content
2 layers73 × 48.1 mmPcbmotor base, the printed circuit board in 3D

Kicad design files for prism laser direct imager using up5k FPGA and ESP32

Size
73 × 48.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
36
Pads
88
Tracks, vias
221, 31
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Dec 2018
Updated
3 Nov 2026

Overview

Pcbmotor base is an open-source printed circuit board by hstarmans, from the hstarmans/firestarter repository on GitHub. It is a 2-layer board of 73 × 48.1 mm with 17 parts on 36 nets, routed with 221 tracks and 31 vias.

It is built around the MP6543HGL-A-P. Its parts include 6 connectors, 4 capacitors, 4 ICs and 3 resistors. It belongs with the fPGA and programmable logic boards and the ESP32 and FPGA and CPLD boards of this library.

Main components

1

README

lasermodule/laserdiode/README.md

Laser Diode Mount & Driver PCB

Laser Diode Mount & Driver PCB

Carrier PCB for the laser diode module inside the scanhead housing. Provides pogo-pin connection to the back plate of the laserhead. Solder contacts provide opton to determine pin routing.

Key Details

  • Function: Laser diode mounting and modulation interface
  • Contacts: Spring-loaded pogo pin pads and direct solder pads for high-speed modulation driver connection
  • Form Factor: Compact circular/rectangular footprint fitting diode heatsink assembly

Part of the Hexastorm (Firestarter) open-hardware laser direct imaging project.

Parts

17
QtyValueFootprintReferences
310KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13, R14, R15
3Conn_01x01sockets_scanhead:TestPoint_Pad_D2.5mm_nosilkJ15, J16, J17
3DRV5033FAxDBZPackage_TO_SOT_SMD:SOT-23U6, U7, U8
10.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9
1100uFCapacitor_SMD:CP_Elec_6.3x5.4C3
11uFCapacitor_SMD:C_0805_2012MetricC2
14.7uFCapacitor_SMD:C_0805_2012MetricC1
1Conn_01x03sockets_scanhead:pcbmotor_smdJ4
1Conn_01x13sockets_scanhead:motor_13pinJ5
1MP6543HGL-A-PPackage_DFN_QFN:QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm_ThermalViasU1
1mirrormotorsockets_scanhead:mirror_motorJ1

More from hstarmans/firestarter

11
  • 4 layers88.4 × 63.6 mmCompute, the printed circuit board in 3D

    Compute

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    125 parts13
  • 2 layers105.5 × 66 mmBase, the printed circuit board in 3D

    Base

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    45 parts13
  • 2 layers48 × 67.8 mmMirrormotor, the printed circuit board in 3D

    Mirrormotor

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    44 parts13
  • 2 layers21 × 15.5 mmLaserdiode, the printed circuit board in 3D

    Laserdiode

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    13 parts13
  • 2 layers99.8 × 25.7 mmSideplatediode, the printed circuit board in 3D

    Sideplatediode

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    7 parts13
  • 2 layers99.7 × 59 mmTopplate, the printed circuit board in 3D

    Topplate

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    7 parts13
  • 2 layers99.7 × 25.7 mmSideplate, the printed circuit board in 3D

    Sideplate

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    6 parts13
  • 2 layers25.7 × 54.1 mmBackplate, the printed circuit board in 3D

    Backplate

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    5 parts13
  • 2 layers25.7 × 54.1 mmFrontplate, the printed circuit board in 3D

    Frontplate

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    5 parts13
  • 4 layers45.5 × 8.1 mmPcbmotor spiraloptimized, the printed circuit board in 3D

    Pcbmotor spiraloptimized

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    5 parts13
  • 2 layers14 × 16.9 mmPlate, the printed circuit board in 3D

    Plate

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    2 parts13

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Pcbmotor base PCB?

It measures 73 × 48.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcbmotor base use?

17 parts, built around the MP6543HGL-A-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcbmotor base KiCad files?

From the hstarmans/firestarter repository on GitHub, at the commit this page was made from: the board is lasermodule/pcbmotor/pcbmotor_base/pcbmotor_base.kicad_pcb and its schematic base/camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcbmotor base design in my own project?

Its repository states no licence, so its author keeps all rights: ask hstarmans before reusing the design.