
Compute
hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

Kicad design files for prism laser direct imager using up5k FPGA and ESP32
Laserdiode is an open-source printed circuit board by hstarmans, from the hstarmans/firestarter repository on GitHub. It is a 2-layer board of 21 × 15.5 mm with 13 parts on 6 nets, routed with 30 tracks and 11 vias.
It belongs with the fPGA and programmable logic boards and the ESP32 and FPGA and CPLD boards of this library.

Carrier PCB for the laser diode module inside the scanhead housing. Provides pogo-pin connection to the back plate of the laserhead. Solder contacts provide opton to determine pin routing.
Part of the Hexastorm (Firestarter) open-hardware laser direct imaging project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 4 | Conn_01x01 | laserdiode:0906115207514110 | J2, J3, J4, J5 |
| 1 | Conn_01x04 | laserdiode:TO-18-4 | J1 |

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32

hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 21 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hstarmans/firestarter repository on GitHub, at the commit this page was made from: the board is lasermodule/laserdiode/laserdiode.kicad_pcb and its schematic base/camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hstarmans before reusing the design.