2 layers40 × 30 mm
2 layers86 × 54.7 mm
Cebulapass
hspsh/cebulapass1Projek wejściówki na konferencje z będącej gotowym starterem do tworzenia urządzeń IOT z wykorzystaniem nrf24
- Size
- 86 × 54.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 61
- Pads
- 61
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Oct 2019
- Updated
- 20 Oct 2019
Overview
Cebulapass is an open-source printed circuit board by hspsh, from the hspsh/cebulapass repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 86 × 54.7 mm with 3 parts on 61 nets.
Its parts include 2 ICs and 1 connector. It belongs with the STM32 boards of this library.
README
hw/README.mdcebulapass - hw
W tym folderze znajdują się pliki projketu PCB.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | NRF24L01_Breakout_Smd | RF_Module:nRF24L01_Breakout_Smd | U1 |
| 1 | STM32F070CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USB_A | Connector_USB:USB_A_Pads_On_PCB | J1 |
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Cebulapass PCB?
It measures 86 × 54.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cebulapass use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cebulapass KiCad files?
From the hspsh/cebulapass repository on GitHub, at the commit this page was made from: the board is hw/cebulapass.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cebulapass design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).