2 layers44.5 × 72.7 mm
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
28 parts2.1k
2 layers100 × 100 mm
Modul tester
hschack/Modul-tester- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 34
- Pads
- 120
- Tracks, vias
- 150, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 May 2025
- Updated
- 26 May 2025
Overview
Modul tester is an open-source printed circuit board by hschack, from the hschack/Modul-tester repository on GitHub. It is a 2-layer board of 100 × 100 mm with 28 parts on 34 nets, routed with 150 tracks and 4 vias.
Its parts include 11 connectors, 8 diodes and 5 resistors.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R_Small | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 4 | D_Small | Diode_SMD:D_MiniMELF | D1, D3, D4, D5 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D2, D6, D7, D8 |
| 4 | R_Potentiometer_Small | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4 |
| 3 | Conn_01x02_Socket | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.5_1x02_P3.50mm_Vertical | J5, J6, J7 |
| 3 | Conn_01x09_Pin | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_9-G-5.08_1x09_P5.08mm_Vertical | J1, J2, J9 |
| 2 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J8 |
Questions
How big is the Modul tester PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Modul tester use?
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Modul tester KiCad files?
From the hschack/Modul-tester repository on GitHub, at the commit this page was made from: the board is Modul tester.kicad_pcb and its schematic Modul tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Modul tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask hschack before reusing the design.
Similar boards
- 2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0 - 2 layers137.2 × 41.5 mm
Breakout 64pin 176122-6-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
28 parts1.2k - 2 layers45 × 45 mm
Smartbuttons
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
28 parts915 - 2 layers24.1 × 36.2 mm
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0 - 2 layers34.8 × 12.2 mm
- 2 layers55.9 × 99.1 mm
Stm32f0 disco Luos shield
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
28 parts546MIT - 2 layers88 × 25 mm
EleLab v2 Frontpanel a
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
28 parts531GPL-3.0