2 layers97.2 × 59.1 mm
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915
2 layers150 × 80 mm
Game pad
hra1129/Gamepad_like_keyboard2キーボードのようなMSX用ゲームパッド
- Size
- 150 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 17
- Pads
- 85
- Tracks, vias
- 139, 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Feb 2024
- Updated
- 27 Feb 2024
Overview
Game pad is an open-source printed circuit board by hra1129, from the hra1129/Gamepad_like_keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 150 × 80 mm with 35 parts on 17 nets, routed with 139 tracks and 7 vias.
Its parts include 6 diodes, 6 switches and 2 connectors. It belongs with the retro computing and games boards of this library.
README
README.mdGamepad_like_keyboard
キーボードのようなMSX用・SORD M5用ゲームパッド
デフォルトでは、MSX用になっています。 M5用にするためには、MSX Mode と書かれているジャンパをカットして、M5 Mode と書かれているジャンパをショートさせます。 さらに、６つのダイオードを取り付ける必要があります。
キースイッチは、こちら。 https://shop.yushakobo.jp/products/pg1350?_pos=31&_fid=22e06b805&_ss=c
キーキャップは、こちら。 https://shop.yushakobo.jp/products/mbk-choc-low-profile-keycaps?_pos=2&_sid=e73e42cb9&_ss=r
MSX用にする場合は、9pin AMPケーブルを用意して下さい。 M5用にする場合は、PS/2キーボード延長ケーブルやPS/2分岐ケーブルなどを使うのが良いです。（PS/2キーボードやマウスのケーブルは線が省略されている場合があり､その場合使えません）
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 6 | MSX_Mode | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP7, JP8, JP9, JP10 |
| 6 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH3, MH3, MH4 |
| 2 | HOLE1, HOLE2 | ||
| 2 | M5_Mode | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4 |
| 1 | A_Button | 1-Keyboard:Kailh_Choc_V1 | SW2 |
| 1 | B_Button | 1-Keyboard:Kailh_Choc_V1 | SW1 |
| 1 | DOWN | 1-Keyboard:Kailh_Choc_V1 | SW6 |
| 1 | GND Connect | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | LEFT | 1-Keyboard:Kailh_Choc_V1 | SW4 |
| 1 | LOGO | 0-My_Parts:msx_logo | |
| 1 | LOGO | 0-My_Parts:usa | |
| 1 | LOGO | 0-My_Parts:m5_logo | |
| 1 | M5 Gamepad Connector | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | MSX Gamepad Connector | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Normal Connet | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP6 |
| 1 | RIGHT | 1-Keyboard:Kailh_Choc_V1 | SW5 |
| 1 | UP | 1-Keyboard:Kailh_Choc_V1 | SW3 |
Similar boards
- 2 layers62 × 42 mm
- 2 layers75 × 26 mm
DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm
ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0 - 2 layers160.8 × 24.4 mm
- 2 layers75 × 50 mm
- 2 layers50 × 20.5 mm
- 2 layers50.5 × 67.1 mm
Questions
How big is the Game pad PCB?
It measures 150 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Game pad use?
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Game pad KiCad files?
From the hra1129/Gamepad_like_keyboard repository on GitHub, at the commit this page was made from: the board is KiCad7_project/game_pad.kicad_pcb and its schematic KiCad7_project/game_pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Game pad design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).