2 layers95 × 95 mm
2 layers157.4 × 97.6 mm
StackY8960
hra1129/FPGA_MSXtR13- Size
- 157.4 × 97.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 143
- Pads
- 290
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Mar 2026
- Updated
- 7 Nov 2026
Overview
StackY8960 is an open-source printed circuit board by hra1129, from the hra1129/FPGA_MSXtR repository on GitHub, published under the MIT licence. It is a 2-layer board of 157.4 × 97.6 mm with 38 parts on 143 nets.
Its parts include 14 resistors, 6 connectors, 4 capacitors, 4 ICs and 4 diodes.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4.7k | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R16, R17, R18 |
| 4 | 3.3k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12 |
| 4 | 470 | Resistor_SMD:R_0805_2012Metric | R24, R25, R26, R27 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | ~ | 0-My_Parts:SlideSW_Side | SW1, SW2 |
| 1 | 100uF | Capacitor_SMD:C_1210_3225Metric | C4 |
| 1 | 15pF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J4 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | I2S_CONN | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | MSX_EXBUS_A | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | MSX_EXBUS_B | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | SOUNDIN | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | ~ | My Parts:QSPI-SRAM 4Mbit (8SOIC) | U3 |
| 1 | ~ | My Parts:TangPrimer25K(UPPER) | U1 |
| 1 | ~ | My Parts:TangPrimer25K(LOWER) | U2 |
| 1 | ~ | My Parts:CLOCK | U4 |
The 34 most common of 38 parts.
More from hra1129/FPGA_MSXtR
5- 2 layers95 × 95 mm
- 2 layers95 × 95 mm
- 2 layers95 × 95 mm
- 2 layers95 × 95 mm
Similar boards
- 2 layers85 × 115 mm
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
38 parts8.1kCC-BY-SA-4.0 - 2 layers38.1 × 12.7 mm
- 2 layers136 × 84 mm
Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
38 parts915 - 2 layers126.4 × 15.2 mm
- 2 layers66 × 25.4 mm
Ardmover Empfangsspule Yann
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
38 parts282 - 2 layers17.8 × 17.8 mm
Altmode friend
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
38 parts253GPL-3.0 - 2 layers51.4 × 61 mm
- 2 layers125 × 97.2 mm
Questions
How big is the StackY8960 PCB?
It measures 157.4 × 97.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StackY8960 use?
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StackY8960 KiCad files?
From the hra1129/FPGA_MSXtR repository on GitHub, at the commit this page was made from: the board is pcb/FPGA_MSXtR_Stack_Y8960/StackY8960.kicad_pcb and its schematic pcb/FPGA_MSXtR/FPGA_MSXtR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StackY8960 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).