2 layers65 × 56 mm
2 layers32.8 × 58.2 mm
The electronics system for Typhoon Streamliner
- Size
- 32.8 × 58.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 44
- Pads
- 108
- Tracks, vias
- 179, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 May 2024
- Updated
- 18 Oct 2024
Overview
Board1 is an open-source printed circuit board by hpvdt, from the hpvdt/typhoon_electronics repository on GitHub. It is a 2-layer board of 32.8 × 58.2 mm with 17 parts on 44 nets, routed with 179 tracks and 14 vias.
It is built around the STM32F042G6U6TR, TJA1051T/3/1 and TS2940CW33 RPG, with the DX07S016JA3R1500 among its other parts. Its parts include 4 ICs, 3 resistors, 3 connectors, 2 capacitors and 1 switch. It belongs with the STM32 boards of this library.
Main components
4
STM32F042G6U6TR
UFQFN-28-40℃~+85℃ 1.65V~3.6V 12bit 24 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFN-28 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
TS2940CW33 RPG
SOT-223-40℃~+125℃@(Tj) 10mA 1A 26V 3.3V 600mV@(800mA) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTaiwan SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DX07S016JA3R1500
SMDSMD USB Connectors ROHSJAE ElectronicsUSB Connectors
README
README.mdTyphoon Electronics
The electronics system for Typhoon Streamliner
Organization
There is a folder for each subsystem. Within each subsystem folder are hardware and firmware folders. Put hardware related files into the hardware folder, firmware in the firmware folder. Other folders can be added as needed: for example a media folder is handy for storing pictures related to a project which can be used in documentation.
Conventions
Partly for consistency, partly for functionality; please follow the following conventions:
- Try to keep folder names to single words and all lowercase
- Use underscores to separate words in names (e.g.
board_rev1). DO NOT USE SPACES! ESPECIALLY FOR FOLDERS CONTAINING CODE! Spaces in file paths may cause issues in compilers and such so best to avoid them entirely.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 0.47u | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | AH1912-W-7 | Package_TO_SOT_SMD:SC-59 | IC1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J3 |
| 1 | DX07S016JA3R1500 | DX07S016JA3R1500_USBC:CONN12_DX07S_JAE | J1 |
| 1 | STM32F042G6U6TR | STM32:UFQFPN28-4x4mm-M | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TS2940CW33_RPG | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
More from hpvdt/typhoon_electronics
5- 2 layers60 × 60 mm
- 2 layers34.6 × 35.6 mm
- 2 layers36.5 × 26 mm
Typhoon telemetry transmitter
hpvdt/typhoon_electronics
The electronics system for Typhoon Streamliner
20 parts - 2 layers
Typhoon Motherboard KiCad
hpvdt/typhoon_electronics
The electronics system for Typhoon Streamliner
6 parts
Similar boards
- 2 layers39.3 × 49.4 mm
- 2 layers37 × 45 mm
- 4 layers100 × 100 mm
DevB BQ24072
bajraan/PRT_ATHIQ_BQ24072_DevBoard
EXample PCB project for Li-Ion charger BQ24072
113 partsCC0-1.0 - 2 layers96.6 × 80 mm
- 4 layers65 × 75 mm
HomeAssistant
WojciechM98/Home-assistant-ESP32
Home assistand board using ESP32 controlled with MQTT protocol.
151 parts - 2 layers101.8 × 57.8 mm
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart
96 parts1.2kGPL-3.0 - 4 layers68.5 × 87.6 mm
- 2 layers232.6 × 99.3 mm
Questions
How big is the Board1 PCB?
It measures 32.8 × 58.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Board1 use?
17 parts, built around the STM32F042G6U6TR, TJA1051T/3/1, TS2940CW33 RPG and DX07S016JA3R1500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board1 KiCad files?
From the hpvdt/typhoon_electronics repository on GitHub, at the commit this page was made from: the board is speed_cadence/hardware/Board1.kicad_pcb and its schematic environmentals/hardware/env_sens_Kicad/env_sens.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hpvdt before reusing the design.