
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

KiCad PCB artwork for Terasic MTL2 multi touch display IDE to Terasic FPGA devkit GPIO (ITG) compatible adapter
Itg uturn adapter is an open-source printed circuit board by homelith, from the homelith/itg_uturn_adapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.1 × 58.4 mm with 2 parts on 40 nets, routed with 160 tracks and 3 vias.
It belongs with the interfaces and adapters boards of this library.
PCB schematic

Original ITG Adapter

ITG U-turn Adapter front side

ITG U-turn Adapter back side

front side with OST 302-S401 2x20 box pin header and 2x20 generic pin socket mounted
No.20 pin on 2x20 box pin header should be removed for some IDE cable connector

back side with header and socket mounted

connecting to MTL2

connecting to DE10-Nano

Tablet-like composition of MTL2 and DE10-Nano, low-height coupled with ITG U-turn Adapter

| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BoxHeader_02x20 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | PinSocket_02x20 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 19.1 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the homelith/itg_uturn_adapter repository on GitHub, at the commit this page was made from: the board is itg_uturn_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).