

8088 PC XT Compatible
- Size
- 104 × 73.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 109
- Pads
- 260
- Tracks, vias
- 734, 150
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Nov 2021
- Updated
- 23 May 2024
Overview
PPort is an open-source printed circuit board by homebrew8088, from the homebrew8088/8088-PC-Compatible repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 104 × 73.9 mm with 23 parts on 109 nets, routed with 734 tracks and 150 vias.
Its parts include 7 connectors, 4 capacitors and 4 ICs.
README
README.md8088-PC-Compatible
8088 PC Compatible

This is a repository for my 8088 PC Compatible project developed in 2021. The Motherboard is built to be generally PC XT compatible.
Homepage
https://www.homebrew8088.com/
Join the discussion group on Discord
https://discord.gg/AswNqwpRGP
eBay store
http://www.ebay.com/sch/emil6190/m.html
Features:
-8088, NEC V20, OR NEC V40 Processor
-512k RAM (This can be changed)
-8 Bit ISA sockets (4 slots or 7 slots)
-PC Speaker
-USB "Hard Drive"
-PS/2 Keyboard
-ATX form factor
-Add on DMA controller (7 slot ISA only)
My BIOS Files are early versions and are very primitive.
The best BIOS to use is located at https://gitlab.com/hakfoo1/v40-bios. This works on the V20 and V40 just fine. You will need one of the earlier version if you are using an actual 8088 processor. This is due to some 80186 code that was included.
-note this BIOS will not boot without a video card.
You will find the Keyboard Fix under asm. Add this to your autoexec.bat if your keyboard is not working after DOS boots up.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4.7k OHM | Resistor_THT:R_Array_SIP5 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | 0.1uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4 |
| 3 | 74LS138 | Package_DIP:DIP-16_W7.62mm | U2, U3, U4 |
| 2 | L | Motherboard:Large_Via | R, R |
| 1 | 8255 | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | 8255 BASE PORT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J6 |
| 1 | Bus_ISA_8bit | My:BUS_8_BIT | J7 |
| 1 | INTR A SELECT | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J5 |
| 1 | INTR B SELECT | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J4 |
| 1 | PORT A | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | PORT B | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | PORT C | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
More from homebrew8088/8088-PC-Compatible
12- 2 layers182.9 × 172.7 mm

- 2 layers121.9 × 172.7 mm

- 2 layers175 × 73.9 mm

- 2 layers145.8 × 91.4 mm

- 2 layers132 × 73.9 mm

- 2 layers143 × 73.9 mm

- 2 layers132 × 73.9 mm

- 2 layers132 × 73.9 mm

- 2 layers104 × 73.9 mm

- 2 layers104 × 73.9 mm

- 2 layers132 × 73.9 mm

- 2 layers104 × 73.9 mm

Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the PPort PCB?
It measures 104 × 73.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PPort use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PPort KiCad files?
From the homebrew8088/8088-PC-Compatible repository on GitHub, at the commit this page was made from: the board is Kicad/Other PCBs/PPort/PPort.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PPort design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).