

8088 ZIF ISA
8088 PC XT Compatible
- Size
- 132 × 73.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 118
- Pads
- 294
- Tracks, vias
- 1,093, 239
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Nov 2021
- Updated
- 23 May 2024
Overview
8088 ZIF ISA is an open-source printed circuit board by homebrew8088, from the homebrew8088/8088-PC-Compatible repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 132 × 73.9 mm with 28 parts on 118 nets, routed with 1,093 tracks and 239 vias.
It is built around the 74LS245SC, 74LS573PC and 74LS257PC. Its parts include 8 capacitors, 8 ICs, 5 resistors, 2 connectors and 1 crystal.
Main components
374LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS573PC
DIP-200℃~+70℃ 10ns 3ns 4.75V~5.25V 74LS 8 D Latch Tri-State DIP-20 Latches ROHSTexas InstrumentsLatches74LS257PC
DIP-160℃~+70℃ 12mA 2.6mA 24mA 27ns@5V,150pF 4.75V~5.25V 74LS Output enable high-impedance、Tri-state output DIP-16 Signal Switches, Multiplexers, DecodersTexas InstrumentsSignal Switches, Multiplexers, Decoders
README
README.md8088-PC-Compatible
8088 PC Compatible

This is a repository for my 8088 PC Compatible project developed in 2021. The Motherboard is built to be generally PC XT compatible.
Homepage
https://www.homebrew8088.com/
Join the discussion group on Discord
https://discord.gg/AswNqwpRGP
eBay store
http://www.ebay.com/sch/emil6190/m.html
Features:
-8088, NEC V20, OR NEC V40 Processor
-512k RAM (This can be changed)
-8 Bit ISA sockets (4 slots or 7 slots)
-PC Speaker
-USB "Hard Drive"
-PS/2 Keyboard
-ATX form factor
-Add on DMA controller (7 slot ISA only)
My BIOS Files are early versions and are very primitive.
The best BIOS to use is located at https://gitlab.com/hakfoo1/v40-bios. This works on the V20 and V40 just fine. You will need one of the earlier version if you are using an actual 8088 processor. This is due to some 80186 code that was included.
-note this BIOS will not boot without a video card.
You will find the Keyboard Fix under asm. Add this to your autoexec.bat if your keyboard is not working after DOS boots up.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 |
| 2 | , | ||
| 2 | 10K ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | 510 ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 74LS573 | Package_DIP:DIP-20_W7.62mm | U2, U3 |
| 2 | L | Motherboard:Large_Via | R, R |
| 1 | 27 ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U4 |
| 1 | 74LS257 | Package_DIP:DIP-16_W7.62mm | U5 |
| 1 | 8088 | Socket:DIP_Socket-40_W11.9_W12.7_W15.24_W17.78_W18.5_3M_240-1280-00-0602J | U1 |
| 1 | 8253 | Package_DIP:DIP-24_W15.24mm | U8 |
| 1 | 8259 | Package_DIP:DIP-28_W15.24mm | U7 |
| 1 | 8284 | Package_DIP:DIP-18_W7.62mm | U6 |
| 1 | Bus_ISA_8bit | My:BUS_8_BIT | J9 |
| 1 | Conn_02x08_Counter_Clockwise | My:16_EDGE_CARD_BUS | J1 |
| 1 | Crystal | Crystal:Crystal_HC18-U_Vertical | Y1 |
More from homebrew8088/8088-PC-Compatible
12- 2 layers182.9 × 172.7 mm

- 2 layers121.9 × 172.7 mm

- 2 layers175 × 73.9 mm

- 2 layers145.8 × 91.4 mm

- 2 layers143 × 73.9 mm

- 2 layers132 × 73.9 mm

- 2 layers104 × 73.9 mm

- 2 layers132 × 73.9 mm

- 2 layers104 × 73.9 mm

- 2 layers104 × 73.9 mm

- 2 layers132 × 73.9 mm

- 2 layers104 × 73.9 mm

Similar boards
- 2 layers157.5 × 73.9 mm

- 2 layers99.1 × 99.1 mm

- 2 layers162.2 × 134.6 mm

- 2 layers156.2 × 97.8 mm

- 2 layers382.9 × 135.9 mm

Issue 6
alvaroalea/QL_Schematic
Schematic and PCB of the Sinclair QL Computer
284 parts11CERN-OHL-S-2.0 - 2 layers400.9 × 280.5 mm

- 2 layers244 × 244 mm

- 2 layers

EDiCPoster
Nik-Sch/EDiC
Developement, Simulation and Emulation of an 8 bit CPU including a Software Framework for my Masters Thesis
176 parts1
Questions
How big is the 8088 ZIF ISA PCB?
It measures 132 × 73.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8088 ZIF ISA use?
28 parts, built around the 74LS245SC, 74LS573PC and 74LS257PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8088 ZIF ISA KiCad files?
From the homebrew8088/8088-PC-Compatible repository on GitHub, at the commit this page was made from: the board is Kicad/Other PCBs/8088 ZIF ISA/8088.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8088 ZIF ISA design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).