Skip to the content
2 layers45.7 × 45.7 mmBiscuit, the printed circuit board in 3D

A University project to build a programmable robot for kids (PCB design files)

Size
45.7 × 45.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
73
Pads
257
Tracks, vias
1,050, 91
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
28 Jun 2016
Updated
4 Dec 2016

Overview

Biscuit is an open-source printed circuit board by hnez, from the hnez/BlockBot-pcb repository on GitHub. It is a 2-layer board of 45.7 × 45.7 mm with 52 parts on 73 nets, routed with 1,050 tracks and 91 vias.

It is built around the ATMEGA328-AU, LM324 and 74HC595, with the 74LS151PC and TS2940CP33 among its other parts. Its parts include 15 resistors, 12 ICs, 10 capacitors, 7 connectors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

README.md

BlockBot - Housing 3D-Designs

This repository contains all PCB design files.

All designs are created with the KiCad EDA suite.

The directory structure is as follow:

  • blocks - Brick PCB
  • dk_base - Millable PCB for the "denmark base" robot
  • panel - Panelized layout that combines bricks and remote into a single file for cheaper ordering
  • remote - Collector unit PCB

Parts

52
QtyValueFootprintReferences
81kResistors_SMD:R_0805R5, R6, R7, R11, R12, R13, R22, R23
410kResistors_SMD:R_0805R4, R8, R9, R10
410nCapacitors_SMD:C_0805C7, C8, C9, C10
4IRF9952SMD_Packages:SOIC-8-NU8, U9, U10, U11
4LEDLEDs:LED_0805D1, D2, D3, D4
2100nCapacitors_SMD:C_0805C1, C2
21uCapacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_ReflowC3, C4
222pCapacitors_SMD:C_0805C5, C6
2LM324SMD_Packages:SOIC-14_NU5, U7
2RResistors_SMD:R_0805R1, R2
112MHzCrystals:Crystal_HC49-SD_SMDY1
125LC_EEPROMSMD_Packages:SOIC-8-NU6
12k7Resistors_SMD:R_0805R3
174HC595SMD_Packages:SO-16-NU2
174LS151SMD_Packages:SO-16-NU1
1ATMEGA328-AHousings_QFP:TQFP-32_7x7mm_Pitch0.8mmIC1
1D_INPin_Headers:Pin_Header_Straight_1x09P1
1D_OUTPin_Headers:Pin_Header_Straight_1x09P5
1ISPPin_Headers:Pin_Header_Straight_2x03P4
1MOT_1Pin_Headers:Pin_Header_Straight_1x04P6
1MOT_2Pin_Headers:Pin_Header_Straight_1x04P7
1PWR_IOPin_Headers:Pin_Header_Straight_1x06P2
1Q_NPN_BECTO_SOT_Packages_SMD:SOT-23Q1
1Q_PNP_BECTO_SOT_Packages_SMD:SOT-23Q2
1RFM75custom:RFM75U4
1SW_PWRcustom:Schurter_LSG_1301SW1
1TS2940CP33TO_SOT_Packages_SMD:TO-252-2LeadU3
1UARTPin_Headers:Pin_Header_Straight_1x06P3

More from hnez/BlockBot-pcb

3
  • 2 layers100 × 35 mmRemote, the printed circuit board in 3D

    Remote

    hnez/BlockBot-pcb

    A University project to build a programmable robot for kids (PCB design files)

    44 parts
  • 2 layers60 × 24 mmBlocks, the printed circuit board in 3D

    Blocks

    hnez/BlockBot-pcb

    A University project to build a programmable robot for kids (PCB design files)

    29 parts
  • 2 layers91.6 × 47.8 mmDenmarkbase, the printed circuit board in 3D

    Denmarkbase

    hnez/BlockBot-pcb

    A University project to build a programmable robot for kids (PCB design files)

    26 parts

Similar boards

  • 2 layers850.2 × 267.4 mmPCB MP 09, the printed circuit board in 3D

    PCB MP 09

    OmkarTikekar0037/FPGA_Architecture_project

    40 parts2
  • 4 layers100 × 100 mmTouchSynth, the printed circuit board in 3D

    TouchSynth

    cpldcpu/TouchSynth

    Analog Monophonic Synthesizer with a touch keyboard. Controller by CH32V00x

    246 partsMIT
  • 2 layers58 × 101 mmArduinoClockModule, the printed circuit board in 3D

    ArduinoClockModule

    IlmariHirvonen/Cloooock

    A simple or maybe not so simple Arduino based eurorack clock module. Still WIP.

    38 parts
  • 2 layers47.5 × 96 mmEurorack to 3v3, the printed circuit board in 3D

    Eurorack to 3v3

    asmr-systems/development-boards

    development boards

    138 parts1CC0-1.0
  • 2 layers268.9 × 442.5 mmBaseline small, the printed circuit board in 3D

    Baseline small

    koson/e-Power-PCBs

    This repository contains all e-Power PCB projects

    2,112 parts

Questions

How big is the Biscuit PCB?

It measures 45.7 × 45.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Biscuit use?

52 parts, built around the ATMEGA328-AU, LM324, 74HC595 and 74LS151PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Biscuit KiCad files?

From the hnez/BlockBot-pcb repository on GitHub, at the commit this page was made from: the board is biscuit/biscuit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Biscuit design in my own project?

Its repository states no licence, so its author keeps all rights: ask hnez before reusing the design.