Skip to the content
2 layers142.2 × 53.3 mmMega model, the printed circuit board in 3D
Size
142.2 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
86
Pads
167
Tracks, vias
238, 35
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
8 May 2023
Updated
8 May 2023

Overview

Mega model is an open-source printed circuit board by hmbadhon-robotics, from the hmbadhon-robotics/PCB_Design repository on GitHub. It is a 2-layer board of 142.2 × 53.3 mm with 32 parts on 86 nets, routed with 238 tracks and 35 vias.

Its parts include 31 connectors and 1 switch.

README

README.md

PCB_Design

Parts

32
QtyValueFootprintReferences
2AnalogSocket_Arduino_Mega:Socket_Strip_Arduino_1x08P3, P4
15V OutputTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ21
1Barrel_JackConnector_BarrelJack:BarrelJack_HorizontalJ18
1BuckIn(+)Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mmJ19
1BuckIn(-)Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mmJ20
1BuckOut(+)Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mmJ23
1BuckOut(-)Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mmJ22
1CONN_01X01Socket_Arduino_Mega:Arduino_1pinP8
1CommunicationSocket_Arduino_Mega:Socket_Strip_Arduino_1x08P7
1DigitalSocket_Arduino_Mega:Socket_Strip_Arduino_2x18P1
1Driver-01TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ11
1Driver-02TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ12
1Driver-03TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ13
1Driver-04TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ14
1Driver-05TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ15
1PWMSocket_Arduino_Mega:Socket_Strip_Arduino_1x10P5
1PWMSocket_Arduino_Mega:Socket_Strip_Arduino_1x08P6
1PowerConnector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ16
1PowerSocket_Arduino_Mega:Socket_Strip_Arduino_1x08P2
1SW_SPDTConnector_Wire:SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mmSW1
1Servos I2CConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ5
1USB_AConnector_USB:USB_A_Stewart_SS-52100-001_HorizontalJ17
1motor-01Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ6
1motor-02Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ7
1motor-03Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ8
1motor-04Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ9
1motor-05Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ10
1sensor01Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1sensor02Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1sensor03Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ3
1sensor04Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ4

Similar boards

  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    32 parts1kGPL-3.0
  • 2 layers136.8 × 54.2 mmRetropie zero, the printed circuit board in 3D

    Retropie zero

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    32 parts915
  • 2 layersMooltipass top, the printed circuit board in 3D

    Mooltipass top

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    32 parts531
  • 2 layers16 × 20 mmESPKey, the printed circuit board in 3D

    ESPKey

    octosavvi/ESPKey

    Wiegand data logger, replay device and micro door-controller

    32 parts353GPL-2.0
  • 2 layers82 × 40.9 mmDisplay7447, the printed circuit board in 3D

    Display7447

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    32 parts269
  • 2 layers40 × 38 mmShield, the printed circuit board in 3D

    Shield

    murexrobotics/electrical

    Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

    32 parts192MIT
  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers30.9 × 63 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    32 parts170CC0-1.0

Questions

How big is the Mega model PCB?

It measures 142.2 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mega model use?

32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mega model KiCad files?

From the hmbadhon-robotics/PCB_Design repository on GitHub, at the commit this page was made from: the board is mega_model/mega_model.kicad_pcb and its schematic mega_model/mega_model.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mega model design in my own project?

Its repository states no licence, so its author keeps all rights: ask hmbadhon-robotics before reusing the design.