
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Mega model is an open-source printed circuit board by hmbadhon-robotics, from the hmbadhon-robotics/PCB_Design repository on GitHub. It is a 2-layer board of 142.2 × 53.3 mm with 32 parts on 86 nets, routed with 238 tracks and 35 vias.
Its parts include 31 connectors and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Analog | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P3, P4 |
| 1 | 5V Output | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J21 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J18 |
| 1 | BuckIn(+) | Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mm | J19 |
| 1 | BuckIn(-) | Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mm | J20 |
| 1 | BuckOut(+) | Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mm | J23 |
| 1 | BuckOut(-) | Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mm | J22 |
| 1 | CONN_01X01 | Socket_Arduino_Mega:Arduino_1pin | P8 |
| 1 | Communication | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P7 |
| 1 | Digital | Socket_Arduino_Mega:Socket_Strip_Arduino_2x18 | P1 |
| 1 | Driver-01 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J11 |
| 1 | Driver-02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J12 |
| 1 | Driver-03 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J13 |
| 1 | Driver-04 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J14 |
| 1 | Driver-05 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J15 |
| 1 | PWM | Socket_Arduino_Mega:Socket_Strip_Arduino_1x10 | P5 |
| 1 | PWM | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P6 |
| 1 | Power | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J16 |
| 1 | Power | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P2 |
| 1 | SW_SPDT | Connector_Wire:SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm | SW1 |
| 1 | Servos I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | USB_A | Connector_USB:USB_A_Stewart_SS-52100-001_Horizontal | J17 |
| 1 | motor-01 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | motor-02 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | motor-03 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | motor-04 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | motor-05 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | sensor01 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | sensor02 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | sensor03 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | sensor04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 142.2 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hmbadhon-robotics/PCB_Design repository on GitHub, at the commit this page was made from: the board is mega_model/mega_model.kicad_pcb and its schematic mega_model/mega_model.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hmbadhon-robotics before reusing the design.