4 layers160 × 80 mm
2 layers97 × 97 mm
VanPom
hl037/VanPomPower management PCB for vans + firmware
- Size
- 97 × 97 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 162
- Nets
- 120
- Pads
- 713
- Tracks, vias
- 1,513, 301
- Pours
- 39
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Nov 2023
- Updated
- 27 Nov 2023
Overview
VanPom is an open-source printed circuit board by hl037, from the hl037/VanPom repository on GitHub. It is a 2-layer board of 97 × 97 mm with 162 parts on 120 nets, routed with 1,513 tracks and 301 vias.
It is built around the INA240A2D, LM5163DDAR and UCC27517DBVR-TP, with the TVS3300DRV, SN74LV4052APWR-M and PESD2USB3UXT-QR among its other parts. Its parts include 46 capacitors, 37 resistors, 23 diodes, 21 ICs and 11 transistors. It belongs with the ESP32 boards of this library.
Main components
11
INA240A2D
SOIC-8-40℃~+125℃ -4V~80V 1 1.8mA 132dB 2.7V~5.5V 250nV/℃ 2V/us 400kHz 40nV/√Hz@1kHz 50V/V 5uV 90uA Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface ±80V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
LM5163DDAR
ESOP-8-40℃~+150℃@(TJ) 1 10.5uA 300kHz、1MHz 500mA 9V~100V Adjustable Buck Buck Built-in Yes ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
UCC27517DBVR-TP
SOT-23-50℃~+125℃ 1 100uA 11ns 12ns 1V~1.2V 2.4V~2.6V 300mA 33ns 33ns 4.5V~18V 600mA Enable shutdown、Interleaved conduction protection Low Side MOSFET SOT-23-5 Gate Drivers ROHSTECH PUBLICGate Drivers
TVS3300DRV
WSON-6(2x2)-40℃~+125℃ 0.75mm 1 2mm 2mm 33V Integrated FET Overvoltage clamping protection Surface Mount WSON-6(2x2) Surge Protection Devices (SPDs) ROHSTexas InstrumentsSurge Protection Devices (SPDs)
SN74LV4052APWR-M
-- Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
PESD2USB3UXT-QR
SOT-23(TO-236AB)0.56pF 1nA 3.3V 3.3V 4A@8/20us 6.7V ESD IEC 61000-4-2 Unidirectional SOT-23(TO-236AB) ESD and Surge Protection (TVS/ESD) ROHSNexperiaUncategorised
CSD18540Q5B
VSON-8(5x6)-55℃~+175℃ 1 N-channel 1.9V 2.6mΩ 205A 20pF 3.8W 4.23nF 41nC@10V 60V 808pF N-Channel VSON-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETs
OSTT7020150
插件,P=6.35mm-30℃~+105℃ 1 10~24 1x2P 2 25A 2P 300V 6.35mm Green Through Hole 插件,P=6.35mm Screw Terminal Blocks ROHSOn-Shore TechScrew Terminal BlocksCSD19531Q5A
VSONP-8(5x6)-55℃~+150℃ 1 N-channel 100V 110A 125W 16.9pF 3.3V 3.87nF 48nC@10V 5.3mΩ@10V 728pF N-Channel VSONP-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETs
B1100-13-F(MS)
SMASchottky DiodesMSKSEMINX7002AK,215-VB
SOT-23SOT-23 MOSFETs ROHSVBsemi ElecMOSFETs
Parts
162| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16, C17, C18, C21, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43 +2 |
| 18 | PESD2USB3UXT-QR | Package_TO_SOT_SMD:SOT-23-3 | D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18, D21, D22, D23, D24, D25 +2 |
| 7 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R23, R34, R35, R36, R37 |
| 6 | TVS3300DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U4, U5, U9, U11, U12, U18 |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C32, C44, C45, C46 |
| 5 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22, C23, C24, C25, C26 |
| 5 | CSD18540Q5B | Package_SON:VSONP-8-1EP_5x6_P1.27mm | Q7, Q8, Q9, Q10, Q11 |
| 5 | OSTT7020150 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_Horizontal | J1, J2, J3, J4, J5 |
| 4 | 1.8M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25, R26, R27 |
| 4 | 2.21 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
| 4 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R29, R30, R31 |
| 4 | CSD19531Q5A | Package_SON:VSONP-8-1EP_5x6_P1.27mm | Q1, Q2, Q3, Q4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R21, R22 |
| 3 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C11, C12, C27 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C9, C31 |
| 3 | 2m | Perso:R_Shunt_Ohmite_LVK25-fixed | R_sense1, R_sense2, R_sense3 |
| 3 | 74279201 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | FB1, FB2, FB3 |
| 3 | INA240A2D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U14, U15, U16 |
| 3 | LM74700 | Package_TO_SOT_SMD:SOT-23-6 | U6, U7, U8 |
| 2 | 1000p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C10 |
| 2 | 1200u | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C19, C20 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8 |
| 2 | 22u | Inductor_SMD:L_Wuerth_HCF-2818 | L1, L2 |
| 2 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R19 |
| 2 | 4.42 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R7 |
| 2 | 5.6 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8 |
| 2 | 560p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C7 |
| 2 | B1100-13-F | Diode_SMD:D_SMA | D1, D4 |
| 2 | D | Diode_SMD:D_SMA | D2, D3 |
| 2 | LM5109BMA/NOPB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R33 |
| 1 | |||
| 1 | 0.022u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C28 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C13 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C30 |
| 1 | 140k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 220u | Perso:INDPM105103X500N | L3 |
| 1 | 240k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 3.00 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 330k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 390k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 5.11 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 50n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C29 |
| 1 | BQ34Z100-R2 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | BSS84W-7-F | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | Q6 |
| 1 | BZT52C15-7-F | Diode_SMD:D_SOD-123 | D5 |
| 1 | Conn_03x23_Row_Letter_First | Perso:PinHeader_3x23_P2.54mm_Vertical | J6 |
| 1 | ESP32-S3-DEVKITC-1-N16R2 | Perso:XCVR_ESP32-S3-DEVKITC-1 | U13 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | LM5163DDAR | Perso:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.34x2.34mm_ThermalVias | U10 |
| 1 | NX7002AK,215 | Package_TO_SOT_SMD:SOT-23-3 | Q5 |
| 1 | SN74LV4052APWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | IC3 |
| 1 | TLA2528IRTER | Perso:WQFN16_RTE_TEX-L | U17 |
| 1 | TLV70433DBVT | Perso:SOT95P280X145-5N | IC2 |
| 1 | UART1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | UART2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | UART3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | UART4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | UCC27517DBVR | Perso:SOT95P280X145-5N | IC1 |
The 159 most common of 162 parts.
Questions
How big is the VanPom PCB?
It measures 97 × 97 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VanPom use?
162 parts, built around the INA240A2D, LM5163DDAR, UCC27517DBVR-TP and TVS3300DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VanPom KiCad files?
From the hl037/VanPom repository on GitHub, at the commit this page was made from: the board is VanPoM.kicad_pcb and its schematic VanPoM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VanPom design in my own project?
Its repository states no licence, so its author keeps all rights: ask hl037 before reusing the design.
Similar boards
- 4 layers84 × 99 mm
- 4 layers118 × 117 mm
Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 2 layers136.4 × 85.6 mm
- 2 layers10.5 × 19.5 mm
- 4 layers94 × 94 mm
Walter feels
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
153 parts4 - 4 layers100 × 99.9 mm
Solar Project Rev0 - Manufactured First Build
Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.
163 parts - 4 layers110 × 72 mm
Buck 60V 24V 10A
Rithvik-Vadlamani/guadaloop-power-electronics
Selected Guadaloop power-board and levitation H-bridge designs and review packages
52 parts