
CheeseUnua
ssr-cheese/cheese-intro-board
Cheese introduction board data for Micromouse using Stepper motor with STM32F405RG

Sendai2022-pcb is an open-source printed circuit board by hirobon1690, from the hirobon1690/sendai2022-pcb repository on GitHub. It is a 2-layer board of 95 × 72 mm with 28 parts on 72 nets, routed with 237 tracks and 82 vias.
It is built around the SLA7073MPRT and 2SC1815. Its parts include 7 resistors, 3 switches, 2 capacitors, 2 ICs and 1 diode. It belongs with the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | XH-6 | untitled:XH-6 | SENSOR0, STP0, STP1 |
| 2 | 0.1u | untitled:C025-024X044 | C1, C3 |
| 2 | 10k | untitled:0204_5 | R3, R4 |
| 2 | 220 | untitled:0204_5 | R2, R6 |
| 2 | 2SC1815 | untitled:TO92-ECB | T1, T2 |
| 2 | 3.3k | untitled:0204_5 | R1, R5 |
| 2 | PINHD-1X2/90 | untitled:1X02_90 | JP4, JP5 |
| 2 | PINHD-2X4 | untitled:2X04 | JP1, JP2 |
| 2 | SLA7073MPRT | untitled:SLA7073MPRT | U$2, U$3 |
| 2 | TOGGLE | untitled:TOGGLE | S3, S4 |
| 1 | 10-XX | untitled:B3F-10XX | S1 |
| 1 | AL60P | untitled:AL60P | SP1 |
| 1 | LED3MM | untitled:LED3MM | LED1 |
| 1 | PINHD-2X2 | untitled:2X02 | GND0 |
| 1 | R-US_0204/5 | untitled:0204_5 | R7 |
| 1 | Seeed Studio XIAO SAMD21 | Library:XIAO-ESP32C3-14P-2.54-21X17.8MM | U2 |
| 1 | ~ | Library:AE-RP2040 | U1 |

ssr-cheese/cheese-intro-board
Cheese introduction board data for Micromouse using Stepper motor with STM32F405RG

danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts

GuitarML/GuitarPedalPCBs
Collection of KiCad circuit board designs for guitar pedals you can build yourself.



IdahoLabResearch/AcCCS
A collection of tools and scripts used to communicate and emulate Electric Vehicle Communication Controllers (EVCC) and Supply Equipment Communication Controllers (SECC).

StudioKAT/Toolbox
主な機能: - オーディオ/CVミキサー(加算・減算) - CVへのオフセット追加(5V/10V)・極性反転 - 1:3 バッファード・マルチプル - 2:2 ユニティミキサー - 3:1 アベレージミキサー(各チャンネルのゲイン = 1/3) - SIGNセクション:インバーター / 半波整流 / 全波整流 - LOGICセクション:アナログOR / アナログAND - S&Hセクション:サンプル&ホールド / ホワイトノイズ出力…

It measures 95 × 72 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the SLA7073MPRT and 2SC1815. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hirobon1690/sendai2022-pcb repository on GitHub, at the commit this page was made from: the board is untitled.kicad_pcb and its schematic untitled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hirobon1690 before reusing the design.