
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

Controller PCB for photografy sliders and macro
SliderBoard is an open-source printed circuit board by hirikilabs, from the hirikilabs/SliderBoard repository on GitHub. It is a 2-layer board of 99 × 77 mm with 38 parts on 57 nets, routed with 257 tracks and 57 vias.
Its parts include 6 resistors, 6 switches, 5 connectors, 2 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
PCB para control de sliders y microsliders(macro) para fotografía.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | , , | ||
| 2 | 1/16-32 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R6 |
| 2 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A2, A3 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical | RV1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 3.3K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U2 |
| 1 | 620 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | DOWN | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | ENDSTOP | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4 |
| 1 | EN_GND | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP3 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | LCD-016N002L | Display:WC1602A | U1 |
| 1 | LEFT | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | LOGO | Medialab:medialab | G*** |
| 1 | LOGO | ladecadence:Si | G*** |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | RIGHT | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SELECT | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | SHUTTER | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | STEPPER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | STEPPER2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | UP | Button_Switch_THT:SW_PUSH_6mm | SW2 |
The 35 most common of 38 parts.

joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


It measures 99 × 77 mm and has 2 copper layers, 1.6 mm thick.
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hirikilabs/SliderBoard repository on GitHub, at the commit this page was made from: the board is Sliderboard.kicad_pcb and its schematic Sliderboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hirikilabs before reusing the design.