
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects

JLinkV9-mini is an open-source printed circuit board by HinsShum, from the HinsShum/JLinkV9-nano repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 62 × 37 mm with 60 parts on 106 nets, routed with 516 tracks and 94 vias.
It is built around the STM32F207VET6, ME6210A33M3G and UET14A05L03. Its parts include 33 resistors, 15 capacitors, 4 connectors, 3 diodes and 2 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10K | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33 |
| 11 | 100R | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C7, C8, C11, C12, C13, C14, C15 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R1, R22 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C3, C5 |
| 2 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2, J3 |
| 2 | UET14A05L03 | Package_TO_SOT_SMD:SOT-143 | D2, D3 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 12M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | Conn_01x07 | Connector_PinHeader_2.00mm:PinHeader_1x07_P2.00mm_Vertical | J4 |
| 1 | Fuse | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | LED_R_Y | personLibrary:LED_Dual_0606 | D1 |
| 1 | ME6210A33M3G | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | NEC3400 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | STM32F207VET6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects



a5632645/final_design
simple digital waveguide synthesizer & simple mpe midi keyboard(pitch bend and pressure)

a5632645/motor_slider
一个基于ch32v203c8t6的半双工(防止MIDI消息循环)的8通道USB-MIDI电机滑杆


lkellyw/MAZE-SOLVER-PCB-DESIGN
My first PCB designed with STM32 to solve a maze by line following

nexicturbo/esp32c6-iot-sensor-node
KiCad 8 ESP32-C6 environmental sensor node with BME280, SCD41, protected 18650 charging, and manufacturing outputs
It measures 62 × 37 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the STM32F207VET6, ME6210A33M3G and UET14A05L03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HinsShum/JLinkV9-nano repository on GitHub, at the commit this page was made from: the board is hardware/JLinkV9-mini/JLinkV9-mini.kicad_pcb and its schematic hardware/JLinkV9-mini/JLinkV9-mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).