Skip to the content
2 layers181 × 83.5 mmSynth, the printed circuit board in 3D

Designing a pocketchord / synth / music player device.

Size
181 × 83.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
80
Nets
96
Pads
329
Tracks, vias
710, 7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Oct 2026
Updated
21 Oct 2026

Overview

Synth is an open-source printed circuit board by Himikle09, from the Himikle09/Synth-Pocketchord repository on GitHub. It is a 2-layer board of 181 × 83.5 mm with 80 parts on 96 nets, routed with 710 tracks and 7 vias.

Its parts include 34 switches, 24 diodes, 11 resistors, 5 capacitors and 3 ICs. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Synth-Pocketchord

Designing a pocketchord / synth / music player device. Initially, I tested physically using an arduino, a breadboard, some button, and wires. The result was quite successful, but the practicality of such a system wasn't great. I decided to use this project to learn how to use KiCad and first designed a schematic and then a PCB. The purpose of the music player, is to have an array of larger buttons that controls notes. It would most likely have 7 notes with the button above being the note exactly an octave above the lower, and the lower button would be sort of a harmonizer button, to always be able to play a nice chord. The 12 smaller buttons on the right controll recording, looping, kick, snare, chord/notes and much more. The joystick controlls pitch and overall octave.

testing Schematic PCB

Parts

80
QtyValueFootprintReferences
211N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +5
21SW_PushButton_Switch_THT:SW_PUSH-12mmSW1, SW2, SW3, SW4, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +5
12SW_PushButton_Switch_THT:SW_PUSH_6mmSW22, SW23, SW24, SW25, SW26, SW27, SW28, SW29, SW30, SW31, SW32, SW33
8RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R5, R6, R7, R8, R9, R10, R11
4CCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C5, C6
3LEDLED_THT:LED_D3.0mmD23, D24, D25
3PotentiometerPotentiometer_THT:Potentiometer_Alps_RK09K_Single_VerticalR1, R2, R3
2MCP23017x-x-SPPackage_DIP:DIP-28_W7.62mmU1, U2
1Arduino_UNO_R2Module:Arduino_UNO_R2A1
1AudioJack3_SwitchTConnector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_HorizontalJ2
1CCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC3
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU3
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW34

Similar boards

  • 2 layers54.6 × 89.5 mmPicoRX, the printed circuit board in 3D

    PicoRX

    dawsonjon/PicoRX

    Build a SDR SW/MW/LW Receiver with a Raspberry Pi Pico

    80 parts556
  • 2 layers130.4 × 76.6 mmGb stream cart, the printed circuit board in 3D

    Gb stream cart

    Staacks/gbinterceptor

    Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.

    80 parts542
  • 2 layers100 × 100 mmEleLab v2 Bus100, the printed circuit board in 3D

    EleLab v2 Bus100

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    80 parts531GPL-3.0
  • 2 layers59.6 × 109.5 mmKivu12, the printed circuit board in 3D

    Kivu12

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    80 parts410
  • 2 layers137.9 × 92.7 mmErgoTravel, the printed circuit board in 3D

    ErgoTravel

    jpconstantineau/ErgoTravel

    A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox

    80 parts284MIT
  • 2 layers219.1 × 66.7 mmStonehenge30, the printed circuit board in 3D

    Stonehenge30

    marksard/Keyboards

    This repository is warehouse of my keyboard architecture.

    80 parts193MIT
  • 2 layers99.1 × 99.7 mmRC6502 General Video Adapter, the printed circuit board in 3D

    RC6502 General Video Adapter

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    80 parts193GPL-3.0
  • 2 layers226.9 × 108.5 mmMikecinq, the printed circuit board in 3D

    Mikecinq

    mikeholscher/zmk-config-mikecinq

    ZMK Config + Files

    80 parts126

Questions

How big is the Synth PCB?

It measures 181 × 83.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Synth use?

80 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Synth KiCad files?

From the Himikle09/Synth-Pocketchord repository on GitHub, at the commit this page was made from: the board is Synth.kicad_pcb and its schematic Synth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Synth design in my own project?

Its repository states no licence, so its author keeps all rights: ask Himikle09 before reusing the design.