Skip to the content
2 layers106.5 × 76.5 mmPowerwithouttrans, the printed circuit board in 3D

Powerwithouttrans

HIMANSHUMOURYADTU/PCB

PCB DESIGN

Size
106.5 × 76.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
9
Pads
37
Tracks, vias
94, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 May 2025
Updated
16 May 2025

Overview

Powerwithouttrans is an open-source printed circuit board by HIMANSHUMOURYADTU, from the HIMANSHUMOURYADTU/PCB repository on GitHub. It is a 2-layer board of 106.5 × 76.5 mm with 18 parts on 9 nets, routed with 94 tracks and 0 vias.

It is built around the L7805. Its parts include 7 diodes, 4 capacitors, 4 resistors, 2 connectors and 1 IC.

Main components

1

README

README.md

🔌 Transformerless Power Supply PCB (2-Layer Design)

PCB Render

A compact, cost-effective transformerless AC-DC power supply PCB, designed on a 2-layer board, ideal for low-power embedded systems or IoT applications. This design eliminates bulky transformers using capacitive dropper topology.


⚙️ Features

  • 🧩 Transformerless AC to DC Conversion
  • 🌐 Input Voltage: 230V AC (mains)
  • ⚡ Output Voltage: 12V DC (based on design)
  • 🔄 Capacitive Dropper Circuit
  • 🧯 Overvoltage and short-circuit protection
  • 🖨️ 2-Layer PCB for easy fabrication
  • 🔬 Designed using KiCad / (change if EasyEDA, etc.)

📁 Project Files

File/FolderDescription
*.powerwithouttrans.kicad_prlKiCad project file
*.powerwithouttrans_pcbPCB layout
*.kicad_schCircuit schematic
images/PCB renders and layout screenshots
README.mdThis documentation
LICENSEOpen source license (e.g., MIT or CERN-OHL)

🧠 Circuit Description

This power supply utilizes an X-rated safety capacitor to drop mains AC voltage, followed by:

  • Bridge rectifier for AC to DC conversion
  • Zener diode or regulator IC for voltage stabilization
  • Snubber network & fuse for protection

⚠️ Caution: This is a non-isolated design and must be used with care. Do not touch the circuit while it's powered. Suitable for low-current, enclosed applications only.


🖼️ PCB Layout & 3D View

Top ViewBottom View
TopBottom


📝 License

This project is licensed under the MIT License. See the LICENSE file for more information.


🤝 Contributing

Contributions are welcome! Feel free to fork this repository, make enhancements, and submit a pull request.


📬 Contact

For questions or collaboration:


⚠️ Disclaimer: This project involves direct mains voltage. Only qualified individuals should handle or modify the circuit. The creator is not responsible for any damage or injury caused by misuse.

Parts

18
QtyValueFootprintReferences
41N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4
220KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2D_ZenerDiode_THT:D_A-405_P7.62mm_HorizontalD5, D6
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1, J2
10.1ufCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1
11000ufCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC2
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
12.2KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1225K/2.2ufCapacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3C4
1470ufCapacitor_THT:CP_Radial_D10.0mm_P3.80mmC3
1L7805Package_TO_SOT_THT:TO-220-3_VerticalU1
1LEDLED_THT:LED_D5.0mmD7

Similar boards

  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers90.8 × 35.6 mmERCF easy brd, the printed circuit board in 3D

    ERCF easy brd

    Tircown/ERCF-easy-brd

    More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

    28 parts195GPL-3.0
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers91.4 × 71.1 mmPico w rover, the printed circuit board in 3D

    Pico w rover

    NikodemBartnik/Mini-Mars-Rover

    Educational robotic platform made to look like a mini mars rover

    20 parts143MIT
  • 2 layers144.1 × 182.2 mmSHVC CPU-01, the printed circuit board in 3D

    SHVC CPU-01

    starlightk7/OpenSFC

    OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

    498 parts114CERN-OHL-S-2.0
  • 2 layers106.1 × 155 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Redherring32/OpenTendo-TopLoader

    An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)

    84 parts94

Questions

How big is the Powerwithouttrans PCB?

It measures 106.5 × 76.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Powerwithouttrans use?

18 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Powerwithouttrans KiCad files?

From the HIMANSHUMOURYADTU/PCB repository on GitHub, at the commit this page was made from: the board is powerwithouttrans.kicad_pcb and its schematic powerwithouttrans.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Powerwithouttrans design in my own project?

Its repository states no licence, so its author keeps all rights: ask HIMANSHUMOURYADTU before reusing the design.