2 layers34.3 × 31.2 mm
2 layers70 × 9.5 mm
Button board
hggh/led-guy2a new blinking LED guy
- Size
- 70 × 9.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 7
- Tracks, vias
- 20, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2020
- Updated
- 30 May 2021
Overview
Button board is an open-source printed circuit board by hggh, from the hggh/led-guy repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 9.5 mm with 3 parts on 3 nets, routed with 20 tracks and 2 vias.
Its parts include 2 switches and 1 connector. It belongs with the robots and motor control boards of this library.
README
README.mdled-guy
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | B1 | button:SMD_Button | SW1 |
| 1 | B2 | button:SMD_Button | SW2 |
| 1 | conn | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
More from hggh/led-guy
2- 2 layers38 × 32 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Button board PCB?
It measures 70 × 9.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Button board use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Button board KiCad files?
From the hggh/led-guy repository on GitHub, at the commit this page was made from: the board is pcb/button-board/button-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Button board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).