
Power dual buck
HeyPCB/power-kit
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0
Power pd trigger is an open-source printed circuit board by HeyPCB, from the HeyPCB/power-kit repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 28 × 40 mm with 17 parts on 19 nets, routed with 185 tracks and 30 vias.
It is built around the HUSB238_002DD, CL21B105KBFNNNE and FRC0603F2262TS, with the BZT52C10, DMP3013SFV-7(ES) and MX126-5.0-02P-GN01-CU-S-A among its other parts. Its parts include 7 resistors, 3 diodes, 2 capacitors, 2 connectors and 1 IC.
Six small power and charging boards, each a complete KiCad 10 project with Gerbers, BOM and a CPL fitted to JLCPCB's own footprints.
| Board | What it does | Size | DRC errors / unconnected / parity |
|---|---|---|---|
| Dual Rail | 6-15 V to 5 V / 3 A + 3.3 V / 2 A | 50 x 36 mm, 4 layers | 0 / 0 / 0 |
| PD Trigger | USB-C PD sink, DIP-selected 5-20 V | 28 x 40 mm, 2 layers | 0 / 0 / 0 |
| 1S Boost | One lithium cell to 5.1 V | 28 x 30 mm, 2 layers | 0 / 0 / 0 |
| Power Mux | USB-C first, 1S cell as backup | 28 x 32 mm, 2 layers | 0 / 0 / 0 |
| USB eFuse | 5 V inline protection | 26 x 30 mm, 2 layers | 0 / 0 / 0 |
| USB-C Power Meter | Inline power monitor, Qwiic | 32 x 24 mm, 2 layers | 0 / 0 / 0 |
Not fabricated, assembled or powered. Every number in a board's README is measured by KiCad 10 on the files in its folder (report.json). Parts are LCSC-numbered and were in JLCPCB's stock on the date each README gives.
Each board folder holds kicad/ (project), fab/ (Gerbers zip, BOM, CPL, STEP, schematic PDF), media/ (renders and a design-process video) and board.json (the brief it was built from).
Designed with the HeyPCB method on KiCad 10 by heypcb-kicad's headless pipeline with Freerouting 2.4.1.
CERN-OHL-S-2.0, © 2026 heypcb.ai. See LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R5, R7 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 14k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 22.6k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 6.04k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | BZT52C10 | Diode_SMD:D_SOD-123 | D1 |
| 1 | DMP3013SFV | Package_SON:Diodes_PowerDI3333-8 | Q1 |
| 1 | Green (OUT) | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | HUSB238_002DD | Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm | U1 |
| 1 | OUT | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | SMBJ24A | Diode_SMD:D_SMB | D2 |
| 1 | USB-C PD IN | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | VSET 5/9/12/15 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Omron_A6S-410x_W8.9mm_P2.54mm | SW1 |

HeyPCB/power-kit
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/power-kit
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/power-kit
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/power-kit
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/power-kit
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

JuanPoueriet/automatic-spork
Máquina de ruleta física de casino. 6 PCBs: pic32main (cerebro), wheel (rueda de LEDs), displaysa/b/c (paneles de 7 segmentos en cascada) y buttons (botonera).

enkhbold470/iron-node
ESP32-S3 industrial gateway: W5500 Ethernet, isolated RS-485 (ADM2587E), CAN, 9-36 V input. 4-layer KiCad 10 board.

enkhbold470/pd-brick
USB-C Power Delivery bench supply: STUSB4500 sink, LM5176 buck-boost, INA228 monitor, 1.2-22 V set over I2C by an ESP32-S3. 4-layer KiCad 10 board.


anil08607/stm32-smartwatch
A 46 × 46 mm, four-layer Bluetooth smartwatch PCB with a Nordic nRF52810-QFAA, 240 × 240 SPI LCD interface, BMA456 accelerometer, battery-backed PCF8563 RTC, USB-C 5 V charging, protected single-cell battery interface…
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics


enkhbold470/spinner
12-24 V FOC BLDC motor controller: STM32G431, three IR2104 half bridges with 60 V MOSFETs, MT6701 encoder, CAN FD. 4-layer KiCad 10 board.
It measures 28 × 40 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the HUSB238_002DD, CL21B105KBFNNNE, FRC0603F2262TS and BZT52C10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HeyPCB/power-kit repository on GitHub, at the commit this page was made from: the board is boards/pd-trigger/kicad/power_pd_trigger.kicad_pcb and its schematic boards/boost-1s/kicad/power_boost_1s.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).