
ESP32-li ion cell monitor
pcbreflux/espressif
all espressif stuff will committed here

Myrmidex split ergo keyboard with two encoders
Main pcb is an open-source printed circuit board by hexagramg, from the hexagramg/myrmidex-keeb repository on GitHub. It is a 2-layer board of 173.2 × 161.1 mm with 106 parts on 53 nets, routed with 1,272 tracks and 79 vias.
Its parts include 50 diodes, 28 switches, 12 resistors, 4 capacitors and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Myrmidex is split ergo hotswappable keyboard with two rotary encoders. Supports controllers with Pro-Micro layout, has footprints for power switch and battery.

In this repository you will find gerbers and schematics. Gerbers were exported with jlcpcb support in mind. Schematics were made in kicad.
Right now qmk support is implemented, you can find it here
To build this keyboard you will need:
There are places for m2 standoffs, I used these:
Be careful on soldering left side, one diode on the bottom row is flipped. I will probably correct this in the next version, if there will be one.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D12, D13, D14, D15, D16, D17, D21, D22, D23, D24, D25, D26, D27, D31 +34 |
| 24 | KEYSW-keyboard_parts | scamander:Kailh_socket_MX_optional_reversible_with_holes | K2, K3, K11, K12, K13, K14, K15, K16, K17, K22, K23, K24, K25, K26, K27, K32 +8 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R7, R8, R11, R12 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_ISO14580_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | 0.01uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R9, R10 |
| 2 | SW_SPDT | scamander:SW_SPDT+H-MSK12C01_hor(7pin_SMD) | SW1, SW3 |
| 1 | AudioJack4 | scamander:TRRS_PJ-320A_double | J1 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | ProMicro | MechChurch-parts:ProMicro_Dual | U1 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW37 |
| 1 | SW_Push | MechChurch-parts:Switch_Reset_THT | SW2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |

pcbreflux/espressif
all espressif stuff will committed here

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

ToyotaInfoTech/RAMN
RAMN (Resistant Automotive Miniature Network), a miniature CAN/CAN-FD testbed of 4 Electronic Control Units.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
/Revision%201.5%20(Expanded)/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards

LouWii/ErgoMax
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
It measures 173.2 × 161.1 mm and has 2 copper layers, 1.6 mm thick.
106 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hexagramg/myrmidex-keeb repository on GitHub, at the commit this page was made from: the board is kicad/pcb/main_pcb/main_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hexagramg before reusing the design.