Skip to the content
2 layersBadge, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
62
Pads
115
Tracks, vias
87, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Oct 2024
Updated
16 May 2026

Overview

Badge is an open-source printed circuit board by hex-inverter, from the hex-inverter/badge_display repository on GitHub. It is a 2-layer board with 18 parts on 62 nets, routed with 87 tracks and 0 vias.

It is built around the AT25SF128A-SHB-T and DMG2302U. Its parts include 9 capacitors, 3 resistors, 3 connectors, 2 ICs and 1 transistor. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

2

README

README.md

badge_display

Parts

18
QtyValueFootprintReferences
6100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C8, C9
22u2Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6, C7
2Conn_01x02_Pindisplay_custom:2_padsJ1, J3
1100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
14u7Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
17R5Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
1AT25SF128A-SHB-TPackage_SO:SOIC-8W_5.3x5.3mm_P1.27mmU1
1Conn_01x12_Pindisplay_custom:LH128RJ2
1DMG2302UPackage_TO_SOT_SMD:SOT-23Q1
1RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1STM32H503RBTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU2

Similar boards

  • 8 layers45.2 × 29.7 mmOrbitESC, the printed circuit board in 3D

    OrbitESC

    brandonbraun653/OrbitESC

    An attempt at creating my own ESC module

    161 parts2MIT
  • 4 layers63.5 × 165.4 mmPCB 2, the printed circuit board in 3D

    PCB 2

    nathaniel-krueger/Capstone_PCB_2

    115 parts
  • 4 layers310 × 125 mmDev board, the printed circuit board in 3D

    Dev board

    sammaclennan/dev-board

    An 84-key mechanical keyboard

    208 parts
  • 4 layers97.3 × 90.3 mmDashboard, the printed circuit board in 3D

    Dashboard

    patwitt/PGRacingElectronics

    https://www.pgracingteam.pl/

    102 parts4
  • 4 layers50.8 × 50.8 mmController, the printed circuit board in 3D

    Controller

    oats-center/avena-rs

    Avena On The Road: Bringing pavement health data to your fingertips

    63 parts3
  • 2 layersPDM, the printed circuit board in 3D

    PDM

    PGRacing/PDM

    Rev 4.3 | ID | NAME | CAUSE |DIFFICULTY | PRIORITY | STATUS | | --- | --- | --- | --- | --- | --- | | 1. | Create test board for BTS50025-1TAE | Switch with higher Rds(on) should perform better in terms of diagnostics…

    294 parts1
  • 2 layers69 × 72 mmMMv3, the printed circuit board in 3D

    MMv3

    MrCroesus/MMv3

    MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.

    47 parts16Apache-2.0
  • 4 layers40 × 19 mmRom2k40, the printed circuit board in 3D

    Rom2k40

    mengstr/Rom2k40

    EPROM emulator based on RP2040

    28 parts12

Questions

What parts does the Badge use?

18 parts, built around the AT25SF128A-SHB-T and DMG2302U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Badge KiCad files?

From the hex-inverter/badge_display repository on GitHub, at the commit this page was made from: the board is PCB/badge/badge.kicad_pcb and its schematic PCB/badge/badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Badge design in my own project?

Its repository states no licence, so its author keeps all rights: ask hex-inverter before reusing the design.