

- Size
- 87.6 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 10
- Pads
- 42
- Tracks, vias
- 49, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2020
- Updated
- 7 Dec 2020
Overview
Midi is an open-source printed circuit board by hendrikjoosten, from the hendrikjoosten/quick-midi-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 87.6 × 48.3 mm with 17 parts on 10 nets, routed with 49 tracks and 0 vias.
Its parts include 8 switches and 1 resistor. It belongs with the audio and music boards of this library.
README
README.mdquick-midi-pcb
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole_Pad | Connector_Pin:Pin_D1.0mm_L10.0mm | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | SW_Push_Dual | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Midi PCB?
It measures 87.6 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Midi use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Midi KiCad files?
From the hendrikjoosten/quick-midi-pcb repository on GitHub, at the commit this page was made from: the board is midi/midi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Midi design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).