

Unicycle
- Size
- 124.3 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 49
- Pads
- 178
- Tracks, vias
- 220, 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Jul 2023
- Updated
- 24 Jan 2025
Overview
Unicycle is an open-source printed circuit board by he1k, from the he1k/dtu_unicycle repository on GitHub. It is a 2-layer board of 124.3 × 84 mm with 41 parts on 49 nets, routed with 220 tracks and 6 vias.
It is built around the SI2318A-TP. Its parts include 11 capacitors, 11 resistors, 6 connectors, 2 transistors and 1 IC.
Main components
1README
README.mdUnicycle Project
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C6, C9, C11 |
| 4 | 1.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8, C10 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | HEDS 5500 A | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | Pololu G2 18v17 | unicycle_foot:Pololu G2 18v17 Text Up | A1, A2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x3.9 | C7 |
| 1 | 4u7F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | Battery Connector | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | P1 |
| 1 | DMP4010SK3Q-13 | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | Fuse | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | LOGO | unicycle_silk:dtu-logo-black-FTPNT | G*** |
| 1 | Motor Connector Pitch | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | P3 |
| 1 | Motor Connector Roll | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | P4 |
| 1 | Pololu LSM6DSO | unicycle_foot:PololuLSM6DSO Text Up | A3 |
| 1 | SI2318A-TP | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2 |
| 1 | Safety Switch Connector | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | P2 |
| 1 | TSR 2 2450 | unicycle_foot:TSR 2 2450 | IC1 |
| 1 | Teensy 4.0 | unicycle_foot:Teensy40 Simple | A4 |
Similar boards
- 2 layers70 × 35 mm

- 2 layers270 × 11 mm

Daylight Disco
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
41 parts1.1kGPL-3.0 - 2 layers27.5 × 48.3 mm

ICE40DevBoard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
41 parts915 - 2 layers45 × 25 mm

Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
41 parts517GPL-2.0 - 2 layers96.1 × 78.6 mm

EYEBROW WARNING INDICATOR LEFT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
41 parts431 - 2 layers37 × 15 mm

- 2 layers20.3 × 69.7 mm

PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0
Questions
How big is the Unicycle PCB?
It measures 124.3 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Unicycle use?
41 parts, built around the SI2318A-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Unicycle KiCad files?
From the he1k/dtu_unicycle repository on GitHub, at the commit this page was made from: the board is kicad/Unicycle.kicad_pcb and its schematic kicad/Unicycle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Unicycle design in my own project?
Its repository states no licence, so its author keeps all rights: ask he1k before reusing the design.