2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0
2 layers36.8 × 53.3 mm
NESInterface
HBoyd255/NES-controller-USB-interfaceThis is just a simple project to interface the NES controller with USB via the Arduino pro micro.
- Size
- 36.8 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 24
- Pads
- 31
- Tracks, vias
- 10, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Aug 2023
- Updated
- 28 Aug 2023
Overview
NESInterface is an open-source printed circuit board by HBoyd255, from the HBoyd255/NES-controller-USB-interface repository on GitHub. It is a 2-layer board of 36.8 × 53.3 mm with 2 parts on 24 nets, routed with 10 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdNES controller USB interface.
This is just a simple project to interface the NES controller with USB via the Arduino pro micro.
The Code simply Reads the Values from the NES controller's PISO shift reg and turns them into usb keyboard inputs.
The NES port can be found here.
To-Do
- Create port footprint from technical drawing.
- Create port 3D model from technical drawing.
- design Circuit diagram.
- Write code.
- design PCB.
- design housing.
- Assemble PCB and housing.
keep In mind.
It requires quite a bit of force to remove the nes controller from the port, this should influence the design of the housing, as to not add strain to the solder joins or the pcb.
Reference
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ProMicro | ProMicro:ProMicro | U1 |
| 1 | ~ | NES Port:NES Port | U2 |
Questions
How big is the NESInterface PCB?
It measures 36.8 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NESInterface use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NESInterface KiCad files?
From the HBoyd255/NES-controller-USB-interface repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/NESInterface/NESInterface.kicad_pcb and its schematic Hardware/KiCad/NESInterface/NESInterface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NESInterface design in my own project?
Its repository states no licence, so its author keeps all rights: ask HBoyd255 before reusing the design.
Similar boards
- 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
