Skip to the content
2 layers241.7 × 61.9 mmN31, the printed circuit board in 3D

my various 30% keyboards

Size
241.7 × 61.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
83
Nets
66
Pads
358
Tracks, vias
573, 31
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Aug 2019
Updated
30 Aug 2019

Overview

N31 is an open-source printed circuit board by hatanoh, from the hatanoh/30p repository on GitHub. It is a 2-layer board of 241.7 × 61.9 mm with 83 parts on 66 nets, routed with 573 tracks and 31 vias.

It is built around the TPS61221DCK. Its parts include 37 diodes, 35 switches, 2 capacitors, 2 ICs and 1 inductor.

Main components

1

README

README.md

はじめに

本品は試作品です。

キーボードとしての基本的な動作には問題がないことは確認していますが、多少ネジ穴位置や組み立て難易度に難があります。

その辺りご了承ください。

どんなキーボード

BLE Micro Proを使用する31~35キーで3段の細長いキーボードで単3電池1本で駆動します。

トッププレート裏にBMPを配置しているのでProMicroを重ねないタイプの普通のキーボードぐらいの厚さ(7mmスペーサー使用)になっています (Bootleg31除く/Bootleg31は11mm)

Bootleg31

Nomu30の配列でBMP対応して、レバースイッチを付けたキーボード。 レバースイッチは親指で操作してレイヤ切り替えなどに使うことを想定しています。

Soroban30(Bootleg30)

40%キーボードの最下段をちょん切って、「,」「.」のスペースの2uスペースを置いたキーボード

スペースを小指で叩くちょっと苦しいキーボード

Ally13(黒)

soroban30を13°づつ折り曲げて隙間にスイッチを一つ入れたもの

Ally24の中央のBSがない配列になります

Ally24(赤)

soroban30を24°づつ折り曲げて隙間にスイッチを二つ入れたもの

キー配置の詳細はソースのkeymap.cを参照してください

ビルドガイド

Build Guide

ファームウェア

Firmware/BLE Micro Pro

キーボード固有部分

Parts

83
QtyValueFootprintReferences
37DDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +21
18SW_Pushcscslib:CPG151101S11_1uSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW24, SW25, SW26, SW27, SW28, SW29, SW30 +2
10SW_Pushcscslib:CPG151101S11_1uRSW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21
3MountingHolecscslib:HOLE_M2_THH1, H2, H3
210uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2
2TMHU27cscslib:THMU27SW32, SW33
14.7uHInductor_SMD:L_Taiyo-Yuden_NR-30xx_HandSolderingL1
1BLE-Micro-Pro-2cscslib:BLEMicroPro-2NU1
1Battery_Cellcscslib:BatteryHolder_Keystone_2466_1xAAABT1
1LOGOcscslib:BL31_logG***
1LOGOcscslib:autherG***
1SW_PWRcscslib:SLIDE_SWITCH_SK-12D01SW35
1SW_Pushcscslib:CPG151101S11_1.5uSW23
1SW_Pushcscslib:CPG151101S11_ISOSW22
1SW_Pushcscslib:CPG151101S11_1.75uSW31
1SW_RSTcscslib:TACT_SWITCH_TVBP06SW34
1TPS61221Package_TO_SOT_SMD:SOT-363_SC-70-6_HandsolderingU2

More from hatanoh/30p

5
  • 2 layers261.3 × 79.9 mmAlly13, the printed circuit board in 3D

    Ally13

    hatanoh/30p

    my various 30% keyboards

    99 parts4
  • 2 layers251.8 × 59.5 mmN30aj, the printed circuit board in 3D

    N30aj

    hatanoh/30p

    my various 30% keyboards

    95 parts4
  • 2 layers253.6 × 162.5 mmAlly24 PCB, the printed circuit board in 3D

    Ally24 PCB

    hatanoh/30p

    my various 30% keyboards

    91 parts4
  • 2 layers234 × 59.5 mmN30ajPCB, the printed circuit board in 3D

    N30ajPCB

    hatanoh/30p

    my various 30% keyboards

    88 parts4
  • 2 layers270.3 × 162.5 mmAlly24 Top, the printed circuit board in 3D

    Ally24 Top

    hatanoh/30p

    my various 30% keyboards

    58 parts4

Similar boards

  • 2 layers100 × 150 mmBadge RP2350 FPGA, the printed circuit board in 3D

    Badge RP2350 FPGA

    semitov/riscv-fpga-badge-2026

    Electronic badge PCB for RISC-V Summit Europe 2026 in Bologna, Italy.

    105 parts9CERN-OHL-W-2.0
  • 2 layers135.7 × 110.7 mmEx64, the printed circuit board in 3D

    Ex64

    hatanoh/cscs_family

    cscs64 / cscs52 keyboards

    86 parts3MIT
  • 2 layers32 × 76.1 mmDPicoTracker, the printed circuit board in 3D

    DPicoTracker

    Mineinjava/ffellowship

    Frequency Fellowship: Examining Radio Wave Propagation from a High Altitude Balloon

    49 parts1
  • 2 layers85.6 × 54 mmBusiness card pcb, the printed circuit board in 3D

    Business card pcb

    roepkefeller/business-card-pcb

    A PCB business card that shows you your own pulse. Optical PPG sensor drives a ten-LED heart; NFC tag serves the vCard with the card switched off. ATtiny1616, MAX30102, CR2032.

    59 parts1
  • 2 layers80 × 42.5 mmBebl v2, the printed circuit board in 3D

    Bebl v2

    wyolum/bebl_v2

    "Bar End Brake Light" , redux. v2 of Justin's original BEBL with mods.

    75 parts1
  • 2 layers114 × 51 mmController, the printed circuit board in 3D

    Controller

    longhoangcode/P8B-Controller

    Repository for files for an open source gamepad.

    42 partsCC-BY-SA-4.0
  • 2 layers100 × 34 mm7clock, the printed circuit board in 3D

    7clock

    Quard/7clock

    Simple budget clock using 7 segment display with cheap PIC microcontroller and RTC chip

    59 partsMIT

Questions

How big is the N31 PCB?

It measures 241.7 × 61.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the N31 use?

83 parts, built around the TPS61221DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the N31 KiCad files?

From the hatanoh/30p repository on GitHub, at the commit this page was made from: the board is KiCAD/bootleg31-iso/n31.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the N31 design in my own project?

Its repository states no licence, so its author keeps all rights: ask hatanoh before reusing the design.