Skip to the content
2 layers99.1 × 22.9 mmTouchMidi32rev5-4l, the printed circuit board in 3D

PSoC4.TouchMIDI32

Size
99.1 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
86
Pads
225
Tracks, vias
617, 64
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
17 Mar 2017
Updated
26 May 2018

Overview

TouchMidi32rev5-4l is an open-source printed circuit board by hasebems, from the hasebems/TouchMIDI32_firmware repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 22.9 mm with 60 parts on 86 nets, routed with 617 tracks and 64 vias.

It is built around the CY8C4246AZI-L445. Its parts include 37 resistors, 12 capacitors, 10 connectors and 1 IC.

Main components

1

README

README.md

TouchMIDI32_firmware

This software is released under the MIT License, see LICENSE.txt.

Outline

TouchMIDI32_firmware is developed to provide as firmware of "TouchMIDI32". TouchMIDI32 is a microcontroller board with a PSoC4 that has functionalities of touch sensors, USB, I2C, and UART. This firmware is aimed at outputing MIDI Message via USB when touch sensors react.

Environment

These files are built under PSoC Creator(IDE).

概要

TouchMIDI32_firmwareは、TouchMIDI32のファームウェアとして供給するために開発されました。 TouchMIDI32は、PSoC4を搭載したマイコンボードで、タッチセンサ、USB、I2C、UARTなどの機能を持っています。 本ファームウェアでは、タッチセンサの操作によりUSBからMIDIメッセージが出力されます。

利用環境

これらのファイルはIDEである PSoC Creator 上でビルドします。

Parts

60
QtyValueFootprintReferences
32560ΩResistors_SMD:R_0603_HandSolderingR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16
60.1μFCapacitors_SMD:C_0603_HandSolderingC2, C4, C6, C8, C11, C12
51μFCapacitors_SMD:C_0603_HandSolderingC1, C3, C5, C7, C10
4CONN_01X08Pin_Headers:Pin_Header_Straight_1x08P1, P2, P3, P4
34.7kΩResistors_SMD:R_0603_HandSolderingR33, R34, R35
3CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P6, P7, P8
210KΩResistors_SMD:R_0603_HandSolderingR36, R37
12.2nFCapacitors_SMD:C_0603_HandSolderingC9
1CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P9
1CONN_01X05Pin_Headers:Pin_Header_Straight_1x05P5
1CY8C4246AZI-L445Housings_QFP:TQFP-64_10x10mm_Pitch0.5mmU1
1USB_BConnect:USB_Micro-B(molex)P10

Similar boards

  • 2 layers124.5 × 129.5 mmSynth psoc, the printed circuit board in 3D

    Synth psoc

    pmusgrave/synth_psoc

    A drone synthesizer

    250 parts1
  • 2 layers35 × 50 mmGoblin, the printed circuit board in 3D

    Goblin

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    60 parts463
  • 2 layers32.9 × 119.1 mmConnector, the printed circuit board in 3D

    Connector

    thpoll83/PolyKybd

    PolyKybd

    60 parts411CERN-OHL-W-2.0
  • 2 layers35.9 × 62.7 mmRp2040-memcard, the printed circuit board in 3D

    Rp2040-memcard

    sd2psx/pcb

    The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

    60 parts241
  • 2 layers58 × 110 mmBrain ui split pulse, the printed circuit board in 3D

    Brain ui split pulse

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    60 parts222
  • 2 layers52 × 90 mmEmu brd, the printed circuit board in 3D

    Emu brd

    rscott2049/DECstation2040

    A RP2040 based DECstation emulator

    60 parts212BSD-3-Clause
  • 2 layers42.5 × 80 mmSimplemixsmall, the printed circuit board in 3D

    Simplemixsmall

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    60 parts208
  • 2 layers57.4 × 12 mmZicada, the printed circuit board in 3D

    Zicada

    CoretechR/Zicada

    DIY Zigbee Multisensor

    60 parts205GPL-3.0

Questions

How big is the TouchMidi32rev5-4l PCB?

It measures 99.1 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TouchMidi32rev5-4l use?

60 parts, built around the CY8C4246AZI-L445. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TouchMidi32rev5-4l KiCad files?

From the hasebems/TouchMIDI32_firmware repository on GitHub, at the commit this page was made from: the board is hardware/TouchMidi32rev5-4l.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TouchMidi32rev5-4l design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).