2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers76.4 × 104.6 mm
Steambud htswp
harshitgoel96/StreamBuddy2An open source streaming companion
- Size
- 76.4 × 104.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 60
- Pads
- 294
- Tracks, vias
- 600, 43
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Oct 2019
- Updated
- 12 Oct 2019
Overview
Steambud htswp is an open-source printed circuit board by harshitgoel96, from the harshitgoel96/StreamBuddy repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.4 × 104.6 mm with 74 parts on 60 nets, routed with 600 tracks and 43 vias.
It is built around the ATMEGA32U4 and USBLC6-2SC6. Its parts include 16 diodes, 16 switches, 8 capacitors, 4 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdStreamBuddy
An open source streaming companion
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | DIODE | acheron_Components:D_SOD-123 | D0, D1, D2, D3, D10, D11, D12, D13, D20, D21, D22, D23, D30, D31, D32, D33 |
| 16 | SWITCH_PUSH | acheron_MXA:MXA100 | SW0, SW1, SW2, SW3, SW10, SW11, SW12, SW13, SW20, SW21, SW22, SW23, SW30, SW31, SW32, SW33 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6 |
| 3 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | , , |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R_SCL1, R_SDA1 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R_CC1, R_CC2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | ATMEGA32U4 | Keebio-Parts:ATMEGA32U4-AU | IC1 |
| 1 | Conn_01x04_Female | usbc_footprint:OLED_4Pin_outline | J_OLED1 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.00mm:PinSocket_2x03_P2.00mm_Vertical | USBASP1 |
| 1 | Crystal_GND24_Small | acheron_Components:Crystal_SMD_5032-4Pin-HandSolder | X1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | LOGO | acheron_Logos:acheronLong | G*** |
| 1 | SWITCH_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | RESET1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U_ESD1 |
The 59 most common of 74 parts.
Questions
How big is the Steambud htswp PCB?
It measures 76.4 × 104.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Steambud htswp use?
74 parts, built around the ATMEGA32U4 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Steambud htswp KiCad files?
From the harshitgoel96/StreamBuddy repository on GitHub, at the commit this page was made from: the board is PCB/steambud_htswp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Steambud htswp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers373.2 × 131.8 mm
- 2 layers242.2 × 72.1 mm
- 2 layers98.2 × 35 mm
Fc660c
evyd13/fc660c-controller
Custom FC660C controller with USB-C based on hasu's design
30 parts22CC-BY-SA-4.0 - 2 layers61.9 × 65.9 mm
- 4 layers25 × 29.6 mm
Micro
0xCB-dev/0xCB-micro
1% - 65% keyboard controller with RGB underglow and a backlight driver
45 parts5 - 2 layers302.5 × 109.5 mm
- 2 layers301.2 × 96.4 mm
