Skip to the content
4 layers79.8 × 27.9 mmH2s breakout, the printed circuit board in 3D

C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

Size
79.8 × 27.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
7
Nets
4
Pads
26
Tracks, vias
16, 2
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
12 Oct 2026
Updated
12 Oct 2026

Overview

H2s breakout is an open-source printed circuit board by harrymander, from the harrymander/fph-snippets-github repository on GitHub. It is a 4-layer board of 79.8 × 27.9 mm with 7 parts on 4 nets, routed with 16 tracks and 2 vias.

Its parts include 1 connector and 1 switch. It belongs with the interfaces and adapters boards of this library.

README

README.md

Code samples

  1. recap-instrumentation: Research data collection device.

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    • recap-instrumentation/sw/src/sensors.c: sensor reading in timer ISR.
    • recap-instrumentation/sw/drivers/twi-async/twi-async.c: interrupt-driven 'asynchronous' I2C read.
  2. recap-usb-reader: Host application for the device above.

    Cross-platform C++ project for realtime data acquisition and visualisation. Uses Dear ImGui immediate mode GUI framework. GUI and application logic run from the event loop of graphics framework (DirectX on Windows, GLFW on Linux).

    Modules of interest:

    • recap-usb-reader/gui/src/device.hpp: boundary between the device library and the GUI. State pattern.
    • recap-usb-reader/gui/src/observable.hpp: observer pattern used to decouple the device layer from the GUI views.
    • recap-usb-reader/lib/usb-reader/include/recap/usb-reader/reader.hpp: device library interface.
  3. swallow-labeller: Tool for annotating recordings from the device. (complete-swallow-labelling branch).

    C++, Dear ImGui. Modules of interest:

    • swallow-labeller/src/gui/task-filter.cpp: defining filters for different items in GUI list. Example of runtime polymorphism.
    • swallow-labeller/src/gui/task-view.cpp, lines 203-346: undo/redo using the command pattern.

Parts

7
QtyValueFootprintReferences
13V3TestPoint:TestPoint_Keystone_5019_MinatureTP1
1Conn_01x04molex-kk-254-horizontal:Molex_KK-254_1x04_P2.54mm_HorizontalJ1
1DGS_968recap:DGS_968S1
1GNDTestPoint:TestPoint_Keystone_5019_MinatureTP2
1MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1
1RXDTestPoint:TestPoint_Keystone_5019_MinatureTP3
1TXDTestPoint:TestPoint_Keystone_5019_MinatureTP4

More from harrymander/fph-snippets-github

3
  • 4 layers100 × 115 mmInstrumentation v3, the printed circuit board in 3D

    Instrumentation v3

    harrymander/fph-snippets-github

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    157 parts
  • 4 layers100 × 115 mmInstrumentation v2, the printed circuit board in 3D

    Instrumentation v2

    harrymander/fph-snippets-github

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    136 parts
  • 4 layers100 × 50 mmInstrumentation, the printed circuit board in 3D

    Instrumentation

    harrymander/fph-snippets-github

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    74 parts

Similar boards

  • 4 layers32.3 × 61 mmMCL6809 PCB, the printed circuit board in 3D

    MCL6809 PCB

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    7 parts534
  • 4 layers17.8 × 41 mmABSIS Pro Micro, the printed circuit board in 3D

    ABSIS Pro Micro

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    7 parts431
  • 4 layers108 × 31.8 mmSimm72 ram 8M10, the printed circuit board in 3D

    Simm72 ram 8M10

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    7 parts87
  • 4 layers100 × 80 mmDiffpair test, the printed circuit board in 3D

    Diffpair test

    rjwalters/kicad-tools

    Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

    7 parts73MIT
  • 4 layers57.9 × 26 mmMegaCD, the printed circuit board in 3D

    MegaCD

    Board-Folk/MegaCD-Main-BD

    Reproductions of main board PCBs for Sega's Mega CD/Sega CD add-on for the Mega Drive/Genesis console.

    7 parts60
  • 4 layers60 × 40 mmDemo, the printed circuit board in 3D

    Demo

    shibukawa/bdf

    BDF is a browser document-preview suite: it combines converters for many formats (Go/WASM), a browser renderer of about 23 KB gzipped, and a compact intermediate format.

    7 parts51MIT
  • 4 layers10.5 × 10.5 mmLIS2HH12, the printed circuit board in 3D

    LIS2HH12

    marsairforce/breakout_boards

    Small circuit boards to assist with breadboard prototyping with SMD packages.

    7 parts39Unlicense

Questions

How big is the H2s breakout PCB?

It measures 79.8 × 27.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the H2s breakout use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the H2s breakout KiCad files?

From the harrymander/fph-snippets-github repository on GitHub, at the commit this page was made from: the board is recap-instrumentation/hw/h2s-breakout/h2s-breakout.kicad_pcb and its schematic recap-instrumentation/hw/board-v2/instrumentation-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the H2s breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask harrymander before reusing the design.